[MattSAU2XR8]

Hi Brett, if you have a 30 mm disc available I'd suggest a VE caliper might be the easiest solution since already 30 mm and bits readily available, assuming piston size similar to Ford.

If using the standard caliper I've already been thinking about a Chrysler 300c front disc at 345 by 28 mm, although even if its a DBA 4000 quality disc I can't help wondering if it might warp with time - fairly thin for the diameter?? However have been considering knocking up a kit myself to see if it works. If I did is there any chance you can put be onto someone who could make the dogbones from a drawing (should be a simple rectangular bolt pattern...)

Regards,

Matt