Quote:
Originally Posted by g6eturbosam
I got the bremtec euroline but not so sure. Matt where is the euroline in this list?
Sent from my iPhone using Tapatalk
|
The Euroline were not listed on this particular list as the inquiry was for the Brembo 4 piston pad and they don't do the 4 pot shape in the Euroline range. The brembo 6 piston caliper is in the Euroline range and would be number 2 or 3 on the list and they are similar to the Hawk pads and cheaper.
Quote:
Originally Posted by Bluey.the.Coyote
I'd assume the ferodo is the dustiest since it'd be the most aggressive/softest pad for the highest grip?
Keen on option 2, not a track car and I trust your opinion
I'll pull one of each current pad out and list what I have (assuming the number is still on it).
Cheers for all the advice and help!!
|
The Ferodo DS2500 is one of the best street/track pad available and then you either go more street or more track but there are many good pads out there and help is what i do.
Quote:
Originally Posted by Bluey.the.Coyote
my mechanic mate reckons not many (if any) will machine slotted/drilled rotors (confirmed front rotors are ADR2102S Dim and ADR0505SD on the rear
what would you recommend for rotors then? ADB again or???
cheers again mate
|
Thats correct you will find most people stay away from machining these rotors but they are machinable if with in thickness.
DBA is always my first option i can count how many issues i have had on one hand over the years and they back there product.