![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
Hey guys, Just woundering what brand of leads you recomend, bought a set of bosch super sports abot a month back, finally got around to chanhing them today. First time I've done the leads on a AU 6, but after about an hour was ready to turn the key, and it ran like a bucket of crap. Had a look at the terminals and they are absolute shite! All off them are out of shap, some are covered buy the rubber. So I put the old ones back on and after 2 and a bit hours she's back to running normal. Anyway back to the point what leads are the go?
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
...
Join Date: Apr 2005
Location: Geelong
Posts: 1,407
|
sure there the right leads??
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
Yeah, there the right leads they just don't seem to be good quality. they fit and all, but some wern't connecting as the terminals were covered with ruber, some conected ok but most were too loss or to tight. I f'ed around with 'em for a while, removing ruber, and reshapin terminals with long nose pliers, but in the end got the s h it s and put the old ones back on. First and last time I get bosch leads.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
...
Join Date: Apr 2005
Location: Geelong
Posts: 1,407
|
i reckon there for a different ford. Or the wrong item in the box for sure, Bosch r a huge. where did u get em from ?? super cheap auto??
|
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Moderator
![]() ![]() Join Date: Feb 2005
Location: Kenthurst
Posts: 40,394
|
Have found this with other leads ... the rubber boots over the centre cores don't allow them to reach the top of the spark plug ... the rubber boots can be pushed back up the lead a bit with a bit of force ... but when installing them ... make sure you feel them "pop" over the end of the plug ... should hear a little click/pop sound when it is in place.
I had this issue with my current set of leads ... had to swap them for another set of the same model (suspect the label on the packet was for an E-series though ... not A-series). Compared the distance from the end of the boot to the start of the core in the lead ... on the new ones and the current ones on your car. Check the new leads if you need to swap them and make sure you get the ones with the right clearance.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
the leads from supercheap come pre packaged as you buy them..
its picked out of a box into a tote/pallet then sent to the store then unpacked... so it is a manufacturing fault.. im currently using bosch leads on my lane and they are going fine!
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
![]() |
![]() ![]() |
![]() |
#7 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
|
I've had a set of bosch leads for the wrong car from SCA before... no elbows on the coilpack end and the suckers didn't fit
So either Bosch stuff it up or someone plays with the boxes, they're not sealed. Took them back and got a refund, went to another shop and bought topguns No problems since |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Australia
Posts: 1,452
|
I've got Topgun Max300. No probs.
|
||
![]() |
![]() ![]() |
![]() |
#9 | ||||
Burnin Rubber
Join Date: Jan 2005
Location: Melbourne, Victoria
Posts: 1,824
|
Quote:
__________________
2001 AUII Forte (LPG) K&N Air Filter Tickford Air Intake ***Coming Soon: Clear Side Repeaters*** Quote:
|
||||
![]() |
![]() ![]() |
![]() |
#10 | |||
Miami Pilot
![]() Join Date: Jan 2005
Location: ACT
Posts: 21,701
|
Quote:
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
|||
![]() |
![]() ![]() |
![]() |
#11 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
id say bosch didnt do it right
we have had oil bottles in SEALED boxes from valvoline..castrol..mobil.. all of the manufactuers with NO lids on the bottles of oil!! its fun wen u pick a box up and oil sloshes all down the front of you :jab: i work in the distribution center for supercheap at lawnton in qld :king: so i know how and what goes on with stock before you see it.. but i cant give you prices etc as we dont have any.. thats a store thing
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
![]() |
![]() ![]() |
![]() |
#12 | ||
With da Warlords
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
|
Topguns all I used, never had a prob with em. Maybe a little tight the first time you put them on
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear. For Sale: Parachute. Only used once, never opened, small stain. Windsor Warlords AU III XR-8220 ![]() ![]() XR50T Ute - 300rwkw (give or take depending on the day)
![]() |
||
![]() |
![]() ![]() |
![]() |
#13 | |||
Miami Pilot
![]() Join Date: Jan 2005
Location: ACT
Posts: 21,701
|
Quote:
![]()
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
|||
![]() |
![]() ![]() |
![]() |
#14 | ||
With da Warlords
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
|
lol...
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear. For Sale: Parachute. Only used once, never opened, small stain. Windsor Warlords AU III XR-8220 ![]() ![]() XR50T Ute - 300rwkw (give or take depending on the day)
![]() |
||
![]() |
![]() ![]() |