Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 02-03-2009, 07:34 PM   #1
Blue_XR
Regular Member
 
Blue_XR's Avatar
 
Join Date: Oct 2005
Location: Sydney
Posts: 468
Default Scheduled Service

I just had the scheduled service 30,000 kms done on my sisters LS Focus.

I did an oil change 7,500kms ago and I put Castrol Edge Sport 5w-30 fully syn. Ford have put GTX professional 10w-30. Is this a fully syn oil?

If this is not a fully syn oil do i need to change it to a fully syn oil? Can any damage occur to the engine oil going the other way around as in a fully synth oil to mineral. I forgot to tell her for them to put fully syn oil in the car.

Also an engine flush was done to the car, what type of oil is this?

The service was only done today.

Blue_XR is offline   Reply With Quote Multi-Quote with this Post
Old 02-03-2009, 08:44 PM   #2
NZ XR6
FF.Com.Au Hardcore
 
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,266
Default

Quote:
Originally Posted by Blue_XR
I just had the scheduled service 30,000 kms done on my sisters LS Focus.

I did an oil change 7,500kms ago and I put Castrol Edge Sport 5w-30 fully syn. Ford have put GTX professional 10w-30. Is this a fully syn oil?

If this is not a fully syn oil do i need to change it to a fully syn oil? Can any damage occur to the engine oil going the other way around as in a fully synth oil to mineral. I forgot to tell her for them to put fully syn oil in the car.

Also an engine flush was done to the car, what type of oil is this?

The service was only done today.
No it's not synthetic. But even worse, I think you might find it's not a Ford approved oil for the Focus. The correct Castrol oils (GTX and Magnatec Professional) are labelled A1 and are 5W-30. My Ford dealer uses Magnatec Professional A1 5W-30.

The engine flush is just a money making scheme and is completely unnecessary. Don't pay for it unless you agreed to the dealer doing it.
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels.
NZ XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 02-03-2009, 08:58 PM   #3
819_FLY
Regular Member
 
819_FLY's Avatar
 
Join Date: Oct 2008
Posts: 198
Default

Half the time running a fully synthetic oil in a normal passenger car is just a waste of money. Semi synthetic oils are most likely the norm for being used on engines of this type and age. I change my oil at 7500km with Magnatec and its due for 15000 but I wont go through a dealer, prob through Ultratune or likes of due to the dealer being a complete fraud up here. There shouldn't be a need to run a heavy mineral based oil considering the age of the engines.

Some people swear by running Fully Synthetic oils in their commuter cars, but in my eyes it isn't neccessary and half the time they just think it makes their car go faster.
__________________
I drive my American Owned, German Inspired, South African Built, Australian Bought, European Styled, English Powered car. I might have missed something somewhere... 08' LT Ford Focus CL

Check out 819FLY!!
819_FLY is offline   Reply With Quote Multi-Quote with this Post
Old 02-03-2009, 09:05 PM   #4
Blue_XR
Regular Member
 
Blue_XR's Avatar
 
Join Date: Oct 2005
Location: Sydney
Posts: 468
Default

Thanks for the reply's, how about changing oils ie fully syn to mineral, can engine damage happen, because if so i will drop the oil tomorrow and put the fully syn back in
Blue_XR is offline   Reply With Quote Multi-Quote with this Post
Old 02-03-2009, 10:41 PM   #5
819_FLY
Regular Member
 
819_FLY's Avatar
 
Join Date: Oct 2008
Posts: 198
Default

I dont believe it will damage the engine, but if you are to go for something mineral based then try and stick with something that is the same weight as the full synthetic you put in the engine, but something about 5w-30 or 10w-30
__________________
I drive my American Owned, German Inspired, South African Built, Australian Bought, European Styled, English Powered car. I might have missed something somewhere... 08' LT Ford Focus CL

Check out 819FLY!!
819_FLY is offline   Reply With Quote Multi-Quote with this Post
Old 02-03-2009, 10:46 PM   #6
Blue_XR
Regular Member
 
Blue_XR's Avatar
 
Join Date: Oct 2005
Location: Sydney
Posts: 468
Default

Quote:
Originally Posted by 819_FLY
I dont believe it will damage the engine, but if you are to go for something mineral based then try and stick with something that is the same weight as the full synthetic you put in the engine, but something about 5w-30 or 10w-30
Thanks, I have been looking for answers on the net, the closest I have come is that i can damage an engine, other sites say no it wont and its fine to switch back and fourth.

Im going to take the gamble and see, as the engine only had about 7,500 kms on the fully syn so the new mineral oil from the service should be fine
Blue_XR is offline   Reply With Quote Multi-Quote with this Post
Old 02-03-2009, 11:24 PM   #7
Mullett
Badly Focused
 
Mullett's Avatar
 
Join Date: Jul 2008
Posts: 487
Default

it's not ideal to switch back and forth, but it's ok as long as the two oils are compatible (check with the manufacturer) Fully synth oils are good, but for a street car, they only serve to extend your service intervals. If it'll do 15k on a standard oil, it'll do 30k on a good synth.

-RM.
__________________
07 LT CL, CAI, timing, XR5 springs, LS Zetec wheels
16.045...0.05 of a second! I wanted a 15sec pass!

93 GSR/Evo3...too much to mention, 12.2sec 1/4, FOR SALE!

*Maybe we don't try putting holes in things that sink, yeah?*
Mullett is offline   Reply With Quote Multi-Quote with this Post
Old 02-03-2009, 11:32 PM   #8
Blue_XR
Regular Member
 
Blue_XR's Avatar
 
Join Date: Oct 2005
Location: Sydney
Posts: 468
Default

Thanks, I just checked on the castrol web site and it had 2 points:
-Compatible with normal mineral oils.
-May be topped up or mixed with normal mineral oils. Note: Use of conventional oils for top up will reduce the performance of Castrol Edge 5W-30.
Blue_XR is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL