Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Closed Thread
 
Thread Tools Display Modes
Old 20-12-2011, 09:31 PM   #1
Poetic Justice
NOT A TOYOTA :/
 
Poetic Justice's Avatar
 
Join Date: Jan 2005
Location: Eastern Suburbs, Melb
Posts: 2,554
Default AUIII XR8 or BA XR8?

I'm in the process of looking for a car to buy and want a v8 Ford again.

I'm looking in a price range of somewhere around 10-15k, I could potentially stretch a little more than 15k but don't particularly want to.

A couple of cars I have come across:

AU3 XR8, leather interior, 140kms, priced at around $11,500

Compare this with a BA XR8, similar kms, no leather though at around $13-14k.

I know the BA XR8 has more power, but for some reason I'm of the belief the AU will be the better car to own.

Any thoughts?

__________________
06 LandbargeCruiser Sahara
Managed to remain in the v8 fraternity
Poetic Justice is offline  
Old 20-12-2011, 09:37 PM   #2
THE SLUG
REAL 4X4'S RATTLE
 
THE SLUG's Avatar
 
Join Date: Feb 2011
Location: Sydney, NSW, Australia
Posts: 839
Default Re: AUIII XR8 or BA XR8?

I personally would take the BA. It's got more power, **possibly** more features, better resale and it looks cooler
__________________

THE SLUG - 1985 Toyota 4Runner
2.8L Turbo, 2.5" exhaust, 5" lift, 33" Mickey Thompson MTZs, lots of stickers

THE DAILY - 2006 BFII XR6T
Process West plenum, intercooler, intake kit, and throttle body relocation, 80lb injectors, 4" dump, twin 2.5" X-Force exhaust, high flow cat, ZF tune, 330rwkw @ 15 psi, 20" staggered MC Racing Simmons copies

THE TOY - 2000 AU Falcon
4.0L, 2.5" straight pipe, T5, BA brakes, spool, stripped out, slammed
THE SLUG is offline  
Old 20-12-2011, 09:41 PM   #3
Zedjay
FF.Com.Au Hardcore
 
Zedjay's Avatar
 
Join Date: Jan 2005
Location: NSW Central Coast
Posts: 1,266
Default Re: AUIII XR8 or BA XR8?

the AU would be my choice..built by tickford and it shows in the way they handle..
Zedjay is offline  
Old 20-12-2011, 09:43 PM   #4
Falcman0o7
Banned
 
Falcman0o7's Avatar
 
Join Date: Sep 2009
Location: launceston TAS
Posts: 1,847
Default Re: AUIII XR8 or BA XR8?

Hmmm...I battle about to erupt? LOL!

IMO i don't know. I have a AU2 XR8 and it's a beautiful car. I've never drove a BA XR8 so i can't give an opinion on that but i would think the AU to be cooler.
The last of the tickfords and quad lights, and the last of the little 5.0 windsor.
Also the windsor is alot smaller than that big 5.4 quad cam donk thus the AU being lighter up front not to mention easier and cheaper to repair ect.
The 5.0 in the series 2-3 are handbuilt to with PRIDE by some guy at tickford. More coolness lol

Just my 2 cents
Falcman0o7 is offline  
Old 20-12-2011, 09:43 PM   #5
Paxton
Cobblers!
 
Paxton's Avatar
 
Join Date: Mar 2005
Location: The Shire, NSW
Posts: 4,489
Default Re: AUIII XR8 or BA XR8?

I'd pick the AU. The AUs were better built, with hand built engines, and the one you're looking at has more features.

I'm looking at moving my EF on next year, and an AUII/III 220 is at the top of my list.
__________________
Ego BFII Ghia
Titanium Silver E53 X5 4.4i
Gunmetal EF XR6. Now retired from active duty.
Roses are red. Violets are blue. OS X rocks. Homage to you.
Paxton is offline  
Old 20-12-2011, 09:46 PM   #6
Falcman0o7
Banned
 
Falcman0o7's Avatar
 
Join Date: Sep 2009
Location: launceston TAS
Posts: 1,847
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by SCUD
I'm in the process of looking for a car to buy and want a v8 Ford again.

I'm looking in a price range of somewhere around 10-15k, I could potentially stretch a little more than 15k but don't particularly want to.

A couple of cars I have come across:

AU3 XR8, leather interior, 140kms, priced at around $11,500

Compare this with a BA XR8, similar kms, no leather though at around $13-14k.

I know the BA XR8 has more power, but for some reason I'm of the belief the AU will be the better car to own.

Any thoughts?
GO THE AU! That thing sounds prime!
Falcman0o7 is offline  
Old 20-12-2011, 09:47 PM   #7
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: AUIII XR8 or BA XR8?

I owned an AU III Tickford XR8, and i miss it, if the one your looking
at is in good nick, i'd take that..
Seing as it's the last of the series all the flaws ironed out, and the BA
is the first in the B series, usually isn't a good thing..
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline  
Old 20-12-2011, 09:49 PM   #8
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,839
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: AUIII XR8 or BA XR8?

I faced the same dilemma and went for the AUII XR8.

Pick of the litter is the AUIII XR8.

FYI I paid $9100 for an AU II XR8 220kw - sunroof, leather, momo wheel, bodykit, momo t bar, leather, premium sound and premium brakes




gcg2503 is offline  
Old 20-12-2011, 09:52 PM   #9
Nikked
Oo\===/oO
 
Nikked's Avatar
 
Join Date: Jan 2007
Location: Tamworth
Posts: 11,348
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Long time member, loves Fords, sensible contributor and does some good and interesting posts. 
Default Re: AUIII XR8 or BA XR8?

AU, BA interiors of that age can be horrid, and they are starting to look old.

Take the Au with the leather, better feeling trim...better driving postion etc
__________________





Check out my Photo-chop page

T...I...C...K...F...O...R...D
\≡≡T≡≡/
Nikked is offline  
Old 20-12-2011, 09:52 PM   #10
raptorv8
Banned
 
Join Date: Dec 2011
Posts: 69
Default Re: AUIII XR8 or BA XR8?

Ive owned both when they were new and the Au was a better drive
raptorv8 is offline  
Old 20-12-2011, 11:07 PM   #11
BPXR6T
FF.Com.Au Hardcore
 
Join Date: Mar 2006
Posts: 3,910
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by raptorv8
Ive owned both when they were new and the Au was a better drive
Me too and I agree. The AU was the far better car.
BPXR6T is offline  
Old 20-12-2011, 09:56 PM   #12
Windsor342ci
The Experience...
 
Windsor342ci's Avatar
 
Join Date: Sep 2010
Posts: 1,017
Default Re: AUIII XR8 or BA XR8?

Im just waiting for this place to explode.

I was recently in the search for a new work horse/tow car and was stuck between a BA XR6T and a AU XR8, I made a thread about and eventually it got closed.
Mate, this is no disrespect to BA lovers, because beauty is in the eye of the beholder, but you couldnt pay me enough to go into a BA XR8. A to Z they dont impress me! Ive been in one and had a mate with one. Driven them and all.
The AU's, particulary the III, are an amazing car! Truly amazing! People will tell you black and blue they look like *****, but thats up to you to decide.
AUIII FTW Mate. No questions asked!

And btw, yes on paper the BA has more HP then the AU, but please, dont for 1 second let that make you think they are a quicker car because that couldnt be further from the truth!

Test drive them both, and you will see what Im refering to!
Enjoy buddy and I hope your thread lasts longer then mine!
__________________
Her Daily: BF XR6T ZF
His Daily: FGX XR8 ZF
Their Pride: T3 TE50 Manual
Windsor342ci is offline  
Old 20-12-2011, 10:02 PM   #13
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by CRYHSV
Im just waiting for this place to explode.

I was recently in the search for a new work horse/tow car and was stuck between a BA XR6T and a AU XR8, I made a thread about and eventually it got closed.
Mate, this is no disrespect to BA lovers, because beauty is in the eye of the beholder, but you couldnt pay me enough to go into a BA XR8. A to Z they dont impress me! Ive been in one and had a mate with one. Driven them and all.
The AU's, particulary the III, are an amazing car! Truly amazing! People will tell you black and blue they look like *****, but thats up to you to decide.
AUIII FTW Mate. No questions asked!

And btw, yes on paper the BA has more HP then the AU, but please, dont for 1 second let that make you think they are a quicker car because that couldnt be further from the truth!

Test drive them both, and you will see what Im refering to!
Enjoy buddy and I hope your thread lasts longer then mine!
Totally agree, when i was on the hunt for a B series XR8 while i still owned my AU III XR8, i test drove a 5 speed BA XR8 and was very unimpressed, when i jumped back into my AU it felt much much better to drive, and just felt better overall.... BUT.... Should you consider stretching the budget a bit futher to be able to get your hands and a BF variant, you won't be dissapointed. IMO, the BF MkII series is the best of the B series, and worlds better than the AU.
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline  
Old 20-12-2011, 10:06 PM   #14
Windsor342ci
The Experience...
 
Windsor342ci's Avatar
 
Join Date: Sep 2010
Posts: 1,017
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by Bunyip04
Totally agree, when i was on the hunt for a B series XR8 while i still owned my AU III XR8, i test drove a 5 speed BA XR8 and was very unimpressed, when i jumped back into my AU it felt much much better to drive, and just felt better overall.... BUT.... Should you consider stretching the budget a bit futher to be able to get your hands and a BF variant, you won't be dissapointed. IMO, the BF MkII series is the best of the B series, and worlds better than the AU.

Agreed that the BFII is probably the best of the B series. But still though, the ZF boxes are a tempting thing, but is it enough to settle for the overweight 5.4L? For me, no. As great as the ZF's are, its not enough to make me settle for one. Give me a 5.0L T5 anyday!
__________________
Her Daily: BF XR6T ZF
His Daily: FGX XR8 ZF
Their Pride: T3 TE50 Manual
Windsor342ci is offline  
Old 20-12-2011, 10:10 PM   #15
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by CRYHSV
Agreed that the BFII is probably the best of the B series. But still though, the ZF boxes are a tempting thing, but is it enough to settle for the overweight 5.4L? For me, no. As great as the ZF's are, its not enough to make me settle for one. Give me a 5.0L T5 anyday!
Yeah fair point, but with some cheap sway bars, cat back and a good c.a.i
the BF XR8 is transformed!!! Lol
And meh to the ZF, T56, IWRCMOGTVM!!!
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline  
Old 21-12-2011, 12:12 AM   #16
SteveJH
No longer a Uni student..
 
Join Date: Jan 2010
Location: Coffs Harbour, NSW
Posts: 2,557
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by CRYHSV
Agreed that the BFII is probably the best of the B series. But still though, the ZF boxes are a tempting thing, but is it enough to settle for the overweight 5.4L? For me, no. As great as the ZF's are, its not enough to make me settle for one. Give me a 5.0L T5 anyday!
Actually, I was under the impression that the Windsor and BOSS despite a large physical difference in size actually had a *fairly* similar weight, with both being very heavy engine.
__________________
Previous:
1992 Mitsubishi Lancer - Petrol/Manual/Silver
1997 Ford Falcon GLi - Petrol/Auto/White

Current:
2012 Ford Focus Sport - Petrol/Manual/Black
SteveJH is offline  
Old 21-12-2011, 12:18 AM   #17
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by SteveJH
Actually, I was under the impression that the Windsor and BOSS despite a large physical difference in size actually had a *fairly* similar weight, with both being very heavy engine.
Don't know how reliable this source is, but it's a start!

http://www.fordmods.com/ford-motorsp...r8-t12847.html
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline  
Old 20-12-2011, 10:18 PM   #18
RAPID_BA
Banned
 
Join Date: Nov 2009
Posts: 3,922
Default Re: AUIII XR8 or BA XR8?

The ba xr8 is a runnaway winner. Stock for stock its a choice between a old wheezer that has plenty if low down torque but nothing up top. Or the ba xr8 with acceptable bottom end and heaps of top end. 32 valves and quad cams in a 5.4.
The 5.4 is also far more tunable, 270-300rwkw from a n/a 5.4 is achievable, only a dream for windsor owners.

Powerplant = ba xr8

The ba xr8 is one of the nicest looking fords of all time. The au xr8 looks ok for an au but just can't be compared with the ba on looks.

Looks = ba xr8

The interior of a ba xr8 kills an au xr8s circular dash thing. Far more modern and better seats
U
Interior = ba xr8

The xr8 steers and handles equally to the xr8. The talk about au cars handling well is a myth created by au owners to sell them as the looks detered many.

Handling = ba xr8p

It's a runnaway winner for the xr8. The only place the au wins is cheaper price.

Look I'm not at all saying an au xr8 is no good, its a great car but the ba xr8 is better. Way better.

Think logically would Ford really say let's release a car worse than last years model?

The better comparison with a ba xr8 is the 250kw t3 Tickford car. t3 is A bit behind on power but equal torque but less tunable than the ba.

Last edited by RAPID_BA; 20-12-2011 at 10:24 PM.
RAPID_BA is offline  
Old 20-12-2011, 10:28 PM   #19
Windsor342ci
The Experience...
 
Windsor342ci's Avatar
 
Join Date: Sep 2010
Posts: 1,017
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by HULK_BA
The ba xr8 is a runnaway winner. Stock for stock its a choice between a old wheezer that has plenty if low down torque but nothing up top. Or the ba xr8 with acceptable bottom end and heaps of top end. 32 valves and quad cams in a 5.4.
The 5.4 is also far more tunable, 270-300rwkw from a n/a 5.4 is achievable, only a dream for windsor owners.

Powerplant = ba xr8

The ba xr8 is one of the nicest looking fords of all time. The au xr8 looks ok for an au but just can't be compared with the ba on looks.

Looks = ba xr8

The interior of a ba xr8 kills an au xr8s circular dash thing. Far more modern and better seats

Interior = ba xr8

The xr8 steers and handles equally to the xr8. The talk about au cars handling well is a myth created by au owners to sell them as the looks detered many.

Handling = ba xr8p

It's a runnaway winner for the xr8. The only place the au wins is cheaper price.

Look I'm not at all saying an au xr8 is no good, its a great car but the ba xr8 is better. Way better.

Think logically would Ford really say let's release a car worse than last years model?

The better comparison with a ba xr8 is the 250kw t3 Tickford car. A bit behind on power but equal torque but less tunable than the ba.
Lol... Fail. Hahahahahhaha!!

Come on man, you may have almost an argument but dont compair interiors, the AU interior is amazing. Still looks good today, the BA's are horrid. Cheap cruddy interior. Just yuk and flimsy! Come on man! You cant deny that!
__________________
Her Daily: BF XR6T ZF
His Daily: FGX XR8 ZF
Their Pride: T3 TE50 Manual
Windsor342ci is offline  
Old 20-12-2011, 10:29 PM   #20
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by HULK_BA
The ba xr8 is a runnaway winner. Stock for stock its a choice between a old wheezer that has plenty if low down torque but nothing up top. Or the ba xr8 with acceptable bottom end and heaps of top end. 32 valves and quad cams in a 5.4.
Incorrect - in 220 form, the old wheezer does very nicely right through to red line, and with a tune, comes alive, much as the 5.4 does.

Quote:
Originally Posted by HULK_BA
The 5.4 is also far more tunable, 270-300rwkw from a n/a 5.4 is achievable, only a dream for windsor owners.

Powerplant = ba xr8
Incorrect again - at least not without a lot of mods. The AU is just as modifiable and will gain almost as much power, and the engine weighs less - in fact the whole car weighs less, so power to weight is probably going to be in the AUs favour, plus it has better low end torque, which is where you need it (Top end power is rarely used by most drivers).

Quote:
Originally Posted by HULK_BA
The ba xr8 is one of the nicest looking fords of all time. The au xr8 looks ok for an au but just can't be compared with the ba on looks.

Looks = ba xr8
In YOUR opinion. Personally, I think they each look good in their own way, but the AU XR is more identifiable as an XR, whereas with the BA XR, you have to look twice to make sure it's not an XT with kit and bulge.

Quote:
Originally Posted by HULK_BA
The interior of a ba xr8 kills an au xr8s circular dash thing. Far more modern and better seats

Interior = ba xr8
Again, in YOUR opinion. AU XR seats are actually very comfortable.....

Quote:
Originally Posted by HULK_BA
The xr8 steers and handles equally to the xr8. The talk about au cars handling well is a myth created by au owners to sell them as the looks detered many.

Handling = ba xr8p
Incorrect again. The BA is lighter in the steering and more jittery over the road than an AU XR8. Yes, with added expense, you can possibly get the BA to handle like an AU, but throw the same bits at the AU, and it justs handles better yet....

Quote:
Originally Posted by HULK_BA
It's a runnaway winner for the xr8. The only place the au wins is cheaper price.
Once again, in YOUR opinion. Though your opinion is based on errors, so should be taken with a grain of salt.....

Quote:
Originally Posted by HULK_BA
Look I'm not at all saying an au xr8 is no good, its a great car but the ba xr8 is better. Way better.

Think logically would Ford really say let's release a car worse than last years model?

The better comparison with a ba xr8 is the 250kw t3 Tickford car. A bit behind on power but equal torque but less tunable than the ba.
Once again, incorrect. The T3 is every bit as tunable as a BA - there are guys getting very good power from T3s with just exhaust and tune, and the power/torque is in a better range (low range) than a BA.

If you can get a BF ZF 6 speed auto for $15k, go for it (try auctions....). Otherwise, AU3 over BA any day, In my opinion (and most in this thread, actually), and throw the extra $5 you save at the AU and watch it leave those BAs behind.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline  
Old 20-12-2011, 10:29 PM   #21
SSD-85
Donating Member
Donating Member1
 
Join Date: Aug 2006
Posts: 5,142
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by HULK_BA

The xr8 steers and handles equally to the xr8. The talk about au cars handling well is a myth created by au owners to sell them as the looks detered many.
Oh yes, we are a horrible bunch. Trying to palm off our ugly cars by saying they handle better. What were we thinking?
SSD-85 is offline  
Old 21-12-2011, 09:20 AM   #22
raised by monkeys
FF.Com.Au Hardcore
 
raised by monkeys's Avatar
 
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,138
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by HULK_BA
The talk about au cars handling well is a myth created by au owners to sell them as the looks detered many
Quote:
Originally Posted by HULK_BA
It's a runnaway winner for the xr8. The only place the au wins is cheaper price
WOW. Keep gripping HULK_BA. Didn't your parents ever tell you to stop playing with it or it'll fall off?
__________________
cheers
Shaun

Current
SY FPV F6X Territory #214
Previous
FG MkII G6E Turbo built by Heinrichs Performance and Tuning
BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning

"Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger
raised by monkeys is offline  
Old 20-12-2011, 10:04 PM   #23
Falcman0o7
Banned
 
Falcman0o7's Avatar
 
Join Date: Sep 2009
Location: launceston TAS
Posts: 1,847
Default Re: AUIII XR8 or BA XR8?

Actually read my thread...there is some good reading in there.


http://www.fordforums.com.au/showthread.php?t=11350680
Falcman0o7 is offline  
Old 20-12-2011, 10:09 PM   #24
Windsor342ci
The Experience...
 
Windsor342ci's Avatar
 
Join Date: Sep 2010
Posts: 1,017
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by Falcman0o7
Actually read my thread...there is some good reading in there.


http://www.fordforums.com.au/showthread.php?t=11350680

Great thread Falcman! Good subject and well done for having it open for this long. There was a few times there it looked a bit shady and was about to get closed.
I made my thoughts in there clear aswel with being respectful inmind. But yes, there are many valid point for both parties in your thread
__________________
Her Daily: BF XR6T ZF
His Daily: FGX XR8 ZF
Their Pride: T3 TE50 Manual
Windsor342ci is offline  
Old 20-12-2011, 10:14 PM   #25
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default Re: AUIII XR8 or BA XR8?

Drive a couple of each before you decide.

See you in an AUIII soon ...
T3man is offline  
Old 20-12-2011, 10:18 PM   #26
SSD-85
Donating Member
Donating Member1
 
Join Date: Aug 2006
Posts: 5,142
Default Re: AUIII XR8 or BA XR8?

My opinion is the AU3 XR8 being the clear winner. Better built, better handling, better sounding & better looking. If you are really wanting to compare at least make it fair & put it against a BF, not a BA.

But ultimately, its what makes you happy, drive both & find out which you like more.
SSD-85 is offline  
Old 20-12-2011, 10:25 PM   #27
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: AUIII XR8 or BA XR8?

http://www.fordforums.com.au/showthr...350680&page=18

Read CAT600's bit about the AU over the B series...

At the end of the day, after you test drive either, its
the one that "feels" better for you imo..
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline  
Old 20-12-2011, 10:28 PM   #28
AU Mont
Banned
 
Join Date: Apr 2010
Location: NSW
Posts: 1,424
Default Re: AUIII XR8 or BA XR8?

omg hulk looking for attention again .........
AU Mont is offline  
Old 20-12-2011, 10:29 PM   #29
Polyal
The 'Stihl' Man
Donating Member2
 
Polyal's Avatar
 
Join Date: Jan 2005
Location: TAS
Posts: 27,591
Default Re: AUIII XR8 or BA XR8?

AU without a shadow of a doubt.

That money buys you an AU2/3 and pretty much the best on the market...there was a Congo one for sale not long ago (still might be) which is just beautiful.

The AU WILL have less issues, and if something does arise ill bet my lefty it will be cheaper to fix.

$15k is BA1 money...NO WAY I would touch a BA1 in a million years.

edit: sorry should restate that, I would buy a BA1 and then drop the 260 and get a coyote NA 5.0 in there..I still lust for starting that project...soon soon.
__________________
  • 2017 Toyota Prado (work hack)
  • 2017 Mitsubishi Pajero Sport
  • 2003 CL7 Honda Accord Euro R (JDM) - K20A 6MT
  • 1999 Lexus IS200 - 1G-FE Turbo 6MT
  • 1973 ZF Ford Fairlane
Polyal is offline  
Old 20-12-2011, 10:44 PM   #30
fordAU
Regular Member
 
Join Date: Mar 2006
Location: Can Do Land
Posts: 332
Default Re: AUIII XR8 or BA XR8?

Quote:
Originally Posted by Polyal
AU without a shadow of a doubt.
Totally agree.

To OP the AU XR8's were such a good thing there is no way in the world you would sell one for a Boss 260, a backward step imo, no offence intended to BA V8 owners.

The last of those Windsors is too good to replace, unless it was with a Coyote.
As an overall package the AU is one superb vehicle with plenty of character, performance and road manners.

Good luck in your search.
fordAU is offline  
Closed Thread


Forum Jump


All times are GMT +11. The time now is 07:12 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL