|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link |
|
Thread Tools | Display Modes |
|
24-05-2012, 01:13 PM | #1 | ||
Regular Member
Join Date: Sep 2008
Posts: 182
|
Hey Matt when you have a spare moment(lol) could you post a bit of a photographic reference for us to see the relevant Brembo equipment you supply for the above mentioned models. Might even encourage some more purchases.
Notice I didn't even mention last night's football.........oops me bad :-) |
||
24-05-2012, 05:21 PM | #2 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
|
Quote:
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
25-05-2012, 10:31 PM | #3 | ||
Formerly FPVwannabe
Join Date: Nov 2007
Location: Hills Area, Sydney
Posts: 4,455
|
2008 FPV F6X Territory. 6 piston Brembos up front.
Just bought these DBA 4000 T3 rotors (355mmx32mm). Also got Hawk Performance Ceramic pads (cant see them of course lol)
__________________
MY14 Deep Cherry Red Jeep Grand Cherokee 6.4lt SRT. Borla ATAK axle back exhaust. Hawk ceramic brake pads. CLStech Ribbon DRL mod. X Lume illuminated grille badge. Injen CAI. |
||
26-05-2012, 12:34 AM | #4 | ||
Join Date: Jul 2005
Location: Perth, Western Australia
Posts: 4,513
|
Standard rims
Brembo 6/4 + F6X rims (not a good pic but it is admissible as evidence)
__________________
2015 FGX XR8 5.0 S/C 645 RWKW |
||
26-05-2012, 08:45 AM | #5 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
|
Quote:
There are also plenty of pictures here in our section "Wheels that fit Brembo's' http://www.fordforums.com.au/showthread.php?t=11310061
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
04-07-2012, 09:34 PM | #6 | ||
Starter Motor
Join Date: Sep 2011
Posts: 3
|
Hey there mate i too have the same model TTG and was considering a front brake upgrade and really like the 6pot front set up that's in that picture, just how much does something like that cost + fitting.
|
||
05-07-2012, 03:52 PM | #7 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
|
Quote:
Brembo 6 piston With a plain non slotted discs and rubber lines is $2300 Brembo 6 piston With a slotted disc and rubber lines is $2500 We can also do the DBA T3 slotted discs as shown in the picture along with braided lines as well brembo rear upgrades or matching slotted disc so it is endless really but al at an extra cost. Not sure if the factory wheels clear the brembos so you may need to check.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
05-07-2012, 04:24 PM | #8 | ||
Join Date: Jul 2005
Location: Perth, Western Australia
Posts: 4,513
|
The factory wheels will not clear the Brembos
.
__________________
2015 FGX XR8 5.0 S/C 645 RWKW |
||