Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar
Reload this Page What's a Roll-a-door worth?
Register FAQ Calendar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 05-03-2007, 06:03 PM   #1
Sundeep
Banned
 
Sundeep's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Eastern Subs.
Posts: 2,281
Default What's a Roll-a-door worth?
Hey guys,

I'm looking to get a Roll-a-door put in at home behind the garage. Just want to know if anyone has had one of those standard corrugated looking doors put in recently and can give me a rough price on what they're worth?

It's about 2.5 metres wide by 2 metres high as a guesstimate.

Anyone know or recommend anyone who does them??

Also concreters and pergola builders if possible :P

Sundeep
Sundeep is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2007, 08:04 PM   #2
Walkinshaw
Two > One
 
Walkinshaw's Avatar
 
Join Date: Dec 2004
Location: Adelaide
Posts: 7,063
Default
We just ordered one at work 3.9m wide, 2.7m high $1200. Not sure what a domestic (manual door) will set you back, but shouldnt be too bad
__________________
1978 LTD - 408ci - 11.5@120.6mph -
2004 S4 - 4.2 - M6 - quattro -

Walkinshaw is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2007, 09:28 PM   #3
tabletennisman
Regular Member
 
tabletennisman's Avatar
 
Join Date: Aug 2006
Location: Toowoomba, QLD
Posts: 131
Default
I'm a drafter for a builder, and average size roller door for a single garage, is 2.1m (high) x 2.4m (wide).

Not sure on costs though sorry. Thats the average size for a panel lift door btw... (which is the common doors you see on garages on new houses).
tabletennisman is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2007, 09:34 PM   #4
LUXO_8
windsor user
 
Join Date: Dec 2004
Location: Geelong
Posts: 13,123
Default
sunny it shouldnt cost anymore than 500 bucks MAX for a cheap manual roller door... and thats fitted
my folks had one put up on the back of our carport, which would be about 1 and a half car wide, and it was only 350 or so...
LUXO_8 is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 01:03 PM   #5
LTDHO
The one and only
 
LTDHO's Avatar
 
Join Date: Dec 2004
Location: Carrum Downs, Victoria
Posts: 9,053
Default
Quote:
Originally Posted by MADNC_8
sunny it shouldnt cost anymore than 500 bucks MAX for a cheap manual roller door... and thats fitted
my folks had one put up on the back of our carport, which would be about 1 and a half car wide, and it was only 350 or so...
If you can get them for under $500 I will but 10!

Sunny $1000 is more realistic.
__________________
1992 DC LTDHO 360rwkw built by me
Tuned by CVE Performance
Going of the rails on a crazy train
Other cars include Dynamic ED Sprint, Dynamic DL LTD, Sparkling Burgundy DL LTD, Yellow, Red & Blue XB sedan & Black XB Coupe
LTDHO is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 01:25 PM   #6
holmsy
Banned
 
holmsy's Avatar
 
Join Date: Jan 2007
Location: geelong
Posts: 1,288
Default
Quote:
Originally Posted by LTDHO
If you can get them for under $500 I will but 10!

Sunny $1000 is more realistic.

so when shall i take your order ;)

you can get them pretty cheap. and even cheaper if you wana fit it (which isnt real difficult)
we got ours free i think as my dads a developer and one of the doors they got years ago was damaged so we nabbed it :P
holmsy is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 05:20 PM   #7
LUXO_8
windsor user
 
Join Date: Dec 2004
Location: Geelong
Posts: 13,123
Default
Quote:
Originally Posted by LTDHO
If you can get them for under $500 I will but 10!

Sunny $1000 is more realistic.
yeah?....it was a few years ago but i didnt realise prices had gone up that much!....
LUXO_8 is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2007, 09:34 PM   #8
EA2BA
PM me if you want
 
EA2BA's Avatar
 
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
Default
Seen quite a few on ebay going cheap as well.
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA

Send me a PM if you want to know anything

2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
EA2BA is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 11:01 AM   #9
Sundeep
Banned
 
Sundeep's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Eastern Subs.
Posts: 2,281
Default
Ahh sweet as I hope you're right Wayne. I don't need no fancy *****. Just a manual pull up pull down door in brown :P

I'll call up B&D etc. today.

Will also check out ebay.

Sundeep
Sundeep is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 11:21 AM   #10
dandaman
Regular Member
 
Join Date: Aug 2005
Posts: 72
Default
I got 2 colourbond doors fitted late last year by gliderol, $1800 fitted for colourbond doors, with electric motors, remotes etc etc. They were the standard size as well
dandaman is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 01:25 PM   #11
Bluefreak
Regular Member
 
Bluefreak's Avatar
 
Join Date: Jun 2005
Posts: 301
Default
Quote:
Originally Posted by Mr. Dose
Ahh sweet as I hope you're right Wayne. I don't need no fancy *****. Just a manual pull up pull down door in brown :P

I'll call up B&D etc. today.

Will also check out ebay.

Sundeep
B&D are ripoff bastards... When we moved in our garage door wasn't working properly so I called them up... Because I was only around the corner they said they would send a tech out without a call out fee. Tech arrives and checks fault code, "she's knackered mate, not worth fixing"... "Have a motor in the van and can fix it now if you like"... So i say I don't have cash available but will call them in a week or so to fix it. Went to a wedding that weekend and met a B&D licensed installer, got talking to him and he said he'd drop around and have a look before I did anything drastic. He pulled the control panel plug, squirted some contact cleaner in, plugged it back in and the door has worked faultlessly for the last 7 years...
Bluefreak is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 01:20 PM   #12
TheSneakiness
Adapt or perish...
 
TheSneakiness's Avatar
 
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
Default
Quote:
Originally Posted by Mr. Dose
It's about 2.5 metres wide by 2 metres high as a guesstimate.
Based on the last prices I got...

B&D - $574
Gliderol - $586

Both those are zinc doors (RRP), add roughly $100 for colour. I'm not sure what installers would charge you though.

I'd say LTDHO's guess would be close...
__________________
Carless
TheSneakiness is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 02:40 PM   #13
ebxr8240
Performance moderator
 
ebxr8240's Avatar
 
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical advice. 
Default
If you lived closer you could have two of mine...
The bullet holes come as std though....
Still work perfectly!!!
__________________
Real cars are not driven by front wheels,real cars lift them!!...
BABYS ARE BOTTLE FED, REAL MEN GET BLOWN.
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
Dart 330ci block turbo black pearl EBXR8 482 rwkw..
Daily driver GTE FG..
Projects http://www.fordforums.com.au/showthread.php?t=107711
http://www.fordforums.com.au/showthr...8+turbo&page=4
ebxr8240 is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2007, 03:02 PM   #14
arby
Regular Member
 
Join Date: Jul 2006
Location: Northern Melbourne
Posts: 74
Default
I paid ~$1300 for 3m by 2.8 roller door fully installed. I think it was 400 installation and posts, $800 for door and $100 for for a slope on the bottom of the door.
What ever you do get a canopy.
arby is offline   Reply With Quote Multi-Quote with this Post
Old 07-03-2007, 05:41 AM   #15
jonk
Regular Member
 
Join Date: Mar 2005
Location: Adelaide
Posts: 479
Default
"I'll call up B&D etc. today."

Er, Mr Dose, why didn't you do that in the first place.
jonk is offline   Reply With Quote Multi-Quote with this Post
Old 07-03-2007, 10:44 AM   #16
Sundeep
Banned
 
Sundeep's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Eastern Subs.
Posts: 2,281
Default
Errr to get an idea of what I'm up for before I get ****** around with quotes.

I called 'em up thinking I could get a quote in my 2 days off, but nooo they are booked out for the quotes till Thursday.

Sundeep
Sundeep is offline   Reply With Quote Multi-Quote with this Post
Old 07-03-2007, 10:53 AM   #17
nugget378
Weezland
 
nugget378's Avatar
 
Join Date: Aug 2005
Location: Sydney,workshop mod
Posts: 7,216
Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to impart knowledge in the technical areas. 
Default
Paid $150 for 2 off ebay,standard size in brown,and in top nick.
Its the way to go if your not totally useless and can install yourself..
nugget378 is offline   Reply With Quote Multi-Quote with this Post
Reply

« Previous Thread | Next Thread »

Forum Jump


All times are GMT +11. The time now is 06:36 AM.

Australian Ford Forums - Privacy Statement - Terms of Service - Top

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL