|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
14-03-2015, 09:04 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2011
Posts: 5
|
Hello all,
I have removed the troublesome MK2A Girling servo and installed a Lockheed. As soon as I start the car without touching the brake pedal the brakes lock on. When I take the cap off the white plastic breather ( under the letters "O" on the picture, it just pulls off and has a piece of plastic and a foam filter inside) and pull the little plunger up the brakes come off and I can roll the car. If I disconnect the vacuum to the servo the brakes do not lock on. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 
|
||
|
|
New servo , brakes lock on
Threaded Mode