|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
23-01-2019, 08:03 AM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2019
Posts: 1
|
Hi all,
I have an 04 Falcon. I have an issue with the HIM module. Every now and then the HIM module starts to click when you turn the car on... it doesn't do it all the time and often stops by itself. I don't want to remove the dash and replace the whole unit as it cost heaps and it doesn't do it all the time. I have fount the small grey plug on the side of the module, if I unplug it when it starts clicking... it stops and I plug it back in... problem solved. I want to put a small on/off switch on the plug. Does anyone know which wire is the main feed to the him module that I could put a switch on... Hope this makes sense. Cheers Bruce Swallow |
||
|
|
|
23-01-2019, 08:18 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2013
Posts: 2,037
|
Wiring diagrams are in the Tech Resources
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
2004 Him Module
Linear Mode
