|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
22-12-2005, 06:45 PM
|
#1 | ||
|
Regular Member
Join Date: Sep 2005
Location: manly, Sydney
Posts: 107
|
i have burned my exedy clutch pratically by turning the boost up now has 240-250rwkw . i need to know some solutions either get a 600hp rated clutch or above that , or go powerglide. which would be the cheaper way . by the way i've been told brass button clutches can blow up T5's so can't have one of those any help would be good
__________________
93 EB2 turbo 6 250rwkw manual,microtech computer. 13.10et 109 mph:1syellow1 now auto with jim mock 3000stall sold argh shouldn't have now got start new project in 2010 |
||
|
|
|
08-01-2006, 07:49 PM
|
#2 | ||
|
justa6
Join Date: Jun 2005
Posts: 664
|
hey dude . i've got 330rwkw or so with a brass button spring centre clutch going through a t5 z spec. it's been beautiful, never slipped and is pretty good round town. extreme make one i think, i'm pretty sure that's what brenden is using
|
||
|
|
|
|
22-01-2006, 02:42 PM
|
#3 | ||
|
Starter Motor
Join Date: Jan 2006
Location: doncaster east
Posts: 19
|
how much do they go for mate,i have a full dev 5 kit ,jmm interceptor,lsd,All the good ИИИИ except a clutch,im running 191rwkw n/a with a xr6 heavy duty clutch kit and its starting to slip,flywheel has hot spots,its in a stock t5 do u think i should get a brass button kit and get my flywheel machined n lightened,my mate has 360rwkw in a eb xr6 on boost obviously,it was sadly written off last night,he is running a brass buton kit he got through brendan and his pedal is lighter than mine?wat do u think i should do remeber im pulling 191rwkw n/a with astock t5?
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
clutches
Linear Mode
