|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
22-03-2007, 06:02 PM
|
#1 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
I don't know if everyone has heard but crow cams can't produce any more camshafts through lack of billet's.
These were available from Ford but Ford are no longer supplying them. Appartently they new batch has to come from the states and these won't be available till June. Does anyone know where else you can get equivalent products thats not Jim Mock Motorsport?? Thanks again, Joel |
||
|
|
|
22-03-2007, 06:06 PM
|
#2 | ||
|
Regular Member
Join Date: Mar 2007
Location: GEELONG
Posts: 319
|
I was on the phone with crow cams just yesterday and the didn't mention anything of it. As a matter of fact they were helping me choose the cam setup for my car and had full availability.
|
||
|
|
|
|
22-03-2007, 06:10 PM
|
#3 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
Its just I spoke to them this afternoon and thats what they told me.
|
||
|
|
|
|
22-03-2007, 06:14 PM
|
#4 | ||
|
Regular Member
Join Date: Mar 2007
Location: GEELONG
Posts: 319
|
were you talking to crow cams or a retailer?
|
||
|
|
|
|
22-03-2007, 06:16 PM
|
#5 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
crow cams, number off their website
|
||
|
|
|
|
22-03-2007, 06:23 PM
|
#6 | ||
|
Regular Member
Join Date: Mar 2007
Location: GEELONG
Posts: 319
|
that's odd. oh well. I guess they're going to be having a rough couple of months of sales then.
|
||
|
|
|
|
22-03-2007, 06:39 PM
|
#7 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
hmm I think so, however the camshaft I was looking at needed me to change to 3.45 diff gears, and put in a 3000rpm stall converter or change over to a manual transmission. So its going to cost me $390 for the camshaft, $100 for the vernier gears, $120 for the valve springs, $30 for the lash adjuster repair kit, $600 to get the computer reprogrammed, $1000 for the stall converter and $600 for the diff gears. Plus a bit extra for installing the camshaft and valve springs all up $3500, does this seem reasonable?
|
||
|
|
|
|
22-03-2007, 06:42 PM
|
#8 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
looking at that i will need till june to come up with the cash :(
|
||
|
|
|
|
22-03-2007, 06:48 PM
|
#9 | ||
|
Regular Member
Join Date: Mar 2007
Location: GEELONG
Posts: 319
|
where would you get the computer reprogrammed for $600.00? I got quoted $1200 for a crow cam setup with a mid power cam, lifters springs and all the seals needed. That's all they told me i need. got a quote to install it all for $260.00 from a guy who used to be one of the engineers that did a lot of work on the au's.
|
||
|
|
|
|
22-03-2007, 07:02 PM
|
#10 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
Any of the people off the Unichip website, ( I have a unichip ) will reprogram for around this price, got quoted over the phone yesterday, could have been dynomotive. The bloke from Crow told me $390 for the cam and $120 for the springs and i'm buying the vernier gear off a mate.
You have the eight i'm assuming so you'd need different parts to me. Maybe they have billet for an 8 cyl camshaft but not a inline 6. If you give me the number of the bloke thats doing the installation for you i'll give him a call too. |
||
|
|
|
|
22-03-2007, 07:09 PM
|
#11 | ||
|
Regular Member
Join Date: Mar 2007
Location: GEELONG
Posts: 319
|
it was from martin techno automotive, phone number 52789666, they are located in north geelong. I'm not sure what the cost would be for a I6. and that makes sense about having stock for the 8's and not for the 6's. that's probably what it was then.
|
||
|
|
|
|
22-03-2007, 08:03 PM
|
#12 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
i'd assume the install would be cheaper for the 6 aswell wouldn't it?
|
||
|
|
|
|
22-03-2007, 09:27 PM
|
#13 | ||
|
Regular Member
Join Date: Mar 2007
Location: GEELONG
Posts: 319
|
not necessarily, if it is harder to get the cam in or out than the 8 it could end up being more expensive. I don't know what the set up is for the 6 or how hard it is to get to the cam. He told me with mine it would be about a 4 hr job. Sounded pretty reasonable to me.
|
||
|
|
|
|
22-03-2007, 09:36 PM
|
#14 | ||
|
Regular Member
Join Date: Jan 2006
Location: north ringwood
Posts: 228
|
what 6 do you have im assuming it is the sohc in an eseries or au if so then wade can do a reground cam for around 150ish i think from memory
|
||
|
|
|
|
22-03-2007, 11:12 PM
|
#15 | ||
|
Spr Jenkins
Join Date: Mar 2006
Location: Melbourne
Posts: 597
|
Wade no longer do regrounds for AU's, can't remember why though.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Camshaft Availability
Linear Mode
