|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
21-08-2008, 06:54 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2008
Posts: 1
|
Is it possible/easy to have ABS activated on a CL model vehicle ? Given that most of the kit is already there e.g. LX model.
|
||
|
|
|
21-08-2008, 11:40 PM
|
#2 | ||
|
Badly Focused
Join Date: Jul 2008
Posts: 487
|
It was available in the 'safety pack', but I don't know if they remove the actual hardware, or if it's just a software update. More than likely yours won't have the wheel sensors, wiring loom etc. It's annoying, because this stuff costs them cents, but it'd cost a fortune to buy over the counter.
Easy way, pull the wheel off. Behind the brake disk on the top there should be a sensor with a cable coming off it, that's the ABS sensor. If it's not there, then it'll be a major job to install ABS, and probably expensive. If you're that keen on it, trade yours in and get a new one. You get the ABS, warranty, and all the other perks of a new car  RM.
__________________
07 LT CL, CAI, timing, XR5 springs, LS Zetec wheels 16.045...0.05 of a second! I wanted a 15sec pass! 93 GSR/Evo3...too much to mention, 12.2sec 1/4, FOR SALE! *Maybe we don't try putting holes in things that sink, yeah?* |
||
|
|
|
|
23-08-2008, 10:28 PM
|
#3 | ||
|
I wanna XR5
Join Date: Aug 2005
Location: South Oz
Posts: 749
|
new car would be the best option. CL has none of the wiring or actuator so cost would be over the top, then there is installing it!!
__________________
Great Wall X240. Bouncing around the APY Lands Ex Ford owner and member of this great site for ages. South Australia, where the RIGHT hand lane is the NEW LEFT lane??????!!! %&#@* |
||
|
|
|
|
23-08-2008, 10:44 PM
|
#4 | ||
|
Badly Focused
Join Date: Jul 2008
Posts: 487
|
Second that motion for sure, plus the new one gets side impact airbags
RM.
__________________
07 LT CL, CAI, timing, XR5 springs, LS Zetec wheels 16.045...0.05 of a second! I wanted a 15sec pass! 93 GSR/Evo3...too much to mention, 12.2sec 1/4, FOR SALE! *Maybe we don't try putting holes in things that sink, yeah?* |
||
|
|
|
ABS for 2005 CL
Linear Mode
