2l cam help

[79esky!]

does anyone know how much it would cost to put a nice lumpy cam into my 2l 79 esky? :SaiyanSmi

[mustang]

anyone know where u can get em from either

[bad_mk1_escort]

crow cam does them and othe places the can start from 200+ so have fun

[rag top]

unfortunately, with the 2ltr, the head has to be removed, as the cam comes out the back of the head.

[RScort]

Just weld some extra lumps onto your cam then smooth them down alittle _ you can pick up 2L pinto (i guess its a pinto) parts up pretty cheap over here

[whooligan]

Originally Posted by RScort

Just weld some extra lumps onto your cam then smooth them down alittle _ you can pick up 2L pinto (i guess its a pinto) parts up pretty cheap over here

....I'm sure in your imagination that works really well, but in reality its a lot more complicated than that.
Budget minimum $300-400 and get the complete head done by someone who knows what they are doing. ie Escort/cylinder head specialist. You can have the lumpiest cam in the world, but if the valves/springs etc aren't up to the job you are wasting your time.
Also, you need to get a cam to suit the use of the car. I have a full on race cam in my RS2000 and its just not suited to a road-car. I've had to seriously de-tune it to make the car driveable in traffic and modify the way I drive. Think about what you want and ask your local expert what the best route to take.

[250 Cort]

http://www.tighecams.com.au/cars.htm

try this link its tighe cams in brizzy

[frogscort]

burton power in england would be the absolute best place to buy ur cam but they arent cheap. check them out on the web . www.burtonpower.com