![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,954
|
Have just replaced front wiper motor on the Territory. I lined up the linkage on reassembly as it came apart. A “dry test” without arms, reveals it dips marginally below the parking position before actually stopping.
Speaking of analogue driven twin blade wiper mechanisms generally… Is this normal design? Or are the arms supposed to stop dead at the bottom of their travel when parked? |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Posts: 1,496
|
Maybe with the stress of draging a wiper blade it wouldn't overrun?
|
||
![]() |
![]() ![]() |
![]() |
#3 | |||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,073
|
Quote:
The crank going from motor output shaft into the linkages as well as the pivot shaft crank length will determine wiper sweep angle. When it parks it should just stop, but also take into consideration the momentum of the armature turning. Last edited by Franco Cozzo; 02-06-2022 at 06:54 PM. |
|||
![]() |
![]() ![]() |
![]() |
#4 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,954
|
|
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,073
|
How the crank is positioned on the motor shaft is going to effect where it parks on the windscreen. If you get this position wrong you won't park the wipers where they are supposed to park on the windscreen.
You'd want to replicate it as close as you can from the car you are replacing the motor on with the motor in its park position. |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,954
|
I did, and my observations afterwards reflect something I’d never really thought about before - which is why I’m asking.
|
||
![]() |
![]() ![]() |