Aftermarket Air Intake

sleekism · 23-09-2007, 03:51 PM

Been looking at K&N snorkels as well as SS Big Mouth which are both about 300 bucks.

What are people here doing? Is it a simple bolt on job? What about factory (t series) alternatives?

What about replacing the airbox with a pod filter??

What sort of power am I looking at?

Cheers!

:

falzoony · 23-09-2007, 03:56 PM

ss snorkel isn't a bolt on, you need to cut a bigger hole in your airbox.
Alot of people (like me) get the xr6t snorkel but don't expect much improvement. positives for the xr6t snorkel is that it's bolt on.

sleekism · 23-09-2007, 05:45 PM

So you can just order a xr6t snorkel from the local ford parts dealer?

Whats the difference over the regular intake?

What about the Typhoon intake?

Thanx!

falzoony · 23-09-2007, 06:02 PM

ebay
http://cgi.ebay.com.au/FORD-AU-WIDE-...QQcmdZViewItem
They don't call them xr6t snorkels but they are the same.
Difference is it's a fair bit bigger then the normal intake and you will notice a bit better acceleration but make sure you get one of these http://cgi.ebay.com.au/K-N-Air-Filte...QQcmdZViewItem
Typhoon snorkel is the same (I think) BUT it has a lower snorkel too. They are about $80, but you will get the same result with a bit of plastic piping, which a few other members have done.

falzoony · 23-09-2007, 06:18 PM

http://www.fordforums.com.au/showthr...3&page=3&pp=25
Theres a pic in this thread that shows the size difference.

The Monty · 23-09-2007, 06:21 PM

I use Tickford snorkle, Front of the airbox cut out, K&N Xstream pod in the box, and a mandrel bent three inch intake. It is really hard to do it in the factory airbox, but its worth it, it stays a little cooler, and its legal.

GUNEF · 23-09-2007, 06:33 PM

yea i noticed an improvement when i got the k&n ss induction but im not sure how much of an improvement it was because i got the exaust done at the same time.. but i do know that the ss induction isnt a bolt-on job they have to cut a hole in your air box to fit it.. it doesnt look that hard of a job but the xr-6t one is very populare and very easy to fit. i think you will notice more with the k&n ss one though..

sleekism · 23-09-2007, 08:30 PM

Quote:

Originally Posted by The Monty

I use Tickford snorkle, Front of the airbox cut out, K&N Xstream pod in the box, and a mandrel bent three inch intake. It is really hard to do it in the factory airbox, but its worth it, it stays a little cooler, and its legal.

Tickford snorkel??

Is that from the XR8? How do you fit that?

blackers10 · 23-09-2007, 08:36 PM

it bolts in the stock location
its just alot bigger overall

the stock pipe just pops off and the new one pops on and the 2 screws in the bit above the radiator

get the XR6T intake snorkel from ford (it replaced the XR8 tickford item)

ayeyew · 23-09-2007, 10:42 PM

I bought one off ebay the other day, can't wait to recieve it

On a side note: I put in my K&N filter today, drove around for a bit and i did notice it being a little more responsive, i was actually quite suprised cuz i wasn't expecting anything

schuldiner · 23-09-2007, 11:44 PM

i feel so honored... i'm an internet celebrity

... anyways the high flow panel filter and the xr6t snorkel or ebay equivalent, which will be cheaper no doubt, seems to be the way to go as it's very easy to replace, i think the pod filter requires some mucking around due to the larger ID of the pipe?(4" where the stock box has 2 and 1/2") i think you get a better induction noise. with the full ss induction system i don't think you'll see a much bigger gain for $300 odd plus fiddling around fitting it. i would think you may as well get a G&D type system like casper: http://www.fordforums.com.au/showthr...0&page=4&pp=25
another idea is to replace that 2and 1/2" pipe from the airbox all of this won't really give you more power but it will make it feel a lot smoother and probably increase fuel economy slightly. real gains are seen in exhaust/headers/cam ect. and just a warning... DON'T TELL THEM WHAT IT'S FOR AND DON'T LISTEN WHEN THEY SAY THINGS LIKE "it won't fit" sorry about the long post.

sleekism · 24-09-2007, 09:19 AM

Cheers for the info!

I need to get ahead of my my mums XR6 VCT

I was telling her about the modifications I had planned for my Fairmont and when she got her tax back she stole all my ideas and put them into her XR6

:

Thus why I am booking in for competition extractors and getting a good cold air intake system now!

Can't be overtaken by the olds in their damn sheepskin seat cover, beatle playing XR6 that's just embarassing!

Mark One · 24-09-2007, 10:45 PM

Quote:

Originally Posted by schuldiner

sorry about the long post.

This isn't a game forum mate .

RG · 25-09-2007, 12:24 AM

G&D airbox

schuldiner · 25-09-2007, 12:59 AM

Quote:

Originally Posted by Mark One

This isn't a game forum mate .

well i get cut when people add long posts because i have to read through them so i figure other people get cut when they have to read through my stupid little rants:P never been a part of a game forum so that joke went straight over my head mate.

falzoony · 25-09-2007, 05:44 PM

Quote:

Originally Posted by RedXR347

G&D airbox

I was waiting for someone to say that.

waggaclint · 26-09-2007, 12:32 AM

what sort of gains do you get with a G&D airbox???? arnt they pretty pricey

b2tf · 26-09-2007, 02:10 AM

Quote:

Originally Posted by waggaclint

what sort of gains do you get with a G&D airbox???? arnt they pretty pricey

quicker qtr mile times due to reduced weight in your wallet.

RG · 26-09-2007, 08:09 PM

Quote:

Originally Posted by b2tf

quicker qtr mile times due to reduced weight in your wallet.

You whinge, G&D box is good and you get gains on the 1/4 and the dyno and in fuel economy. Also the induction roar is second to none.

waggaclint · 26-09-2007, 09:29 PM

Quote:

Originally Posted by RedXR347

gains on the 1/4 and the dyno and in fuel economy.

How much of gain do you have figures etc?

JC · 26-09-2007, 11:00 PM

You could go G&D box - they certainly have good results, or you could make one of your own like this one:

9" "Big Bertha" K&N Pod: $93 from repco
1.2mm aluminium sheet offcut from metal place :$15
Fake metal intake pipes (one straight, one 90 degree, cut to suit) : $40 from supercheap
Silicon joiner $10 from supercheap
Clamps $10 from supercheap
Paint to paint any colour you want <$20
Total Cost $168 (raw) or $188 painted, plus around 8 hours of fun (labour)

G&D airbox including 9" K&N Pod: $600 odd
Cheap and tacky (sorry BD) carbon film: around $15

I doubt the additional $400 odd is worth any extra power, but it is certainly a nice design and professionally made.

RG · 27-09-2007, 01:16 AM

Quote:

Originally Posted by waggaclint

How much of gain do you have figures etc?

All depends on the car it's going on.