Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 06-01-2009, 01:11 AM   #1
ayeyew
Teh Baest
 
ayeyew's Avatar
 
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
Default Squeak, Squeak, Squeak -- Turning Left

Been a pretty bad squeaking noise while turning left for the past week or two, doesnt happen all the time either... Usually right at the beginning when i start her up but after i have taken a few corners, she is quiet.

What's the go u reckon?

Hubs? Bearings?

__________________
1999 Liquid Silver AU
Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!)
Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler

Coming..CMS Stg2A Cam, 68mm TB
Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220

Currently:
151kW (165 on other dynos )
ayeyew is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 01:20 AM   #2
philstoj
FF.Com.Au Hardcore
 
philstoj's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
Default

Handbrake shoes...
philstoj is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 09:54 AM   #3
FTE217
T3/Sprint8
Donating Member2
 
FTE217's Avatar
 
Join Date: Jan 2005
Location: Australia
Posts: 16,097
Default

Be more specific, from where front rear ? you say at start up, are we talking engine area or undercar ?
__________________
Tickfords T3/TS50 '02
Sprint8 manual Sept 24 '16
Daily Macan GTS
"Don't believe everything you read on the internet. Abraham Lincoln"
FTE217 is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 01:10 PM   #4
ayeyew
Teh Baest
 
ayeyew's Avatar
 
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
Default

Sorry,

It sounds like it is coming from the front left.

It's not when i start up as such, it's within about the first 3-4 minutes I am driving when i turn left, sometimes in the very beginning (first 10-15 secs of driving) even when i drive straight.
__________________
1999 Liquid Silver AU
Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!)
Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler

Coming..CMS Stg2A Cam, 68mm TB
Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220

Currently:
151kW (165 on other dynos )
ayeyew is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 01:18 PM   #5
FTE217
T3/Sprint8
Donating Member2
 
FTE217's Avatar
 
Join Date: Jan 2005
Location: Australia
Posts: 16,097
Default

I had a squeak in my XR8 similar to that and it had me stuffed where it came from.
Bugger me was the upper ball joint, being encapsulated/non greasable this shouldn't happen but I suppose there's a start for you.
Another could be lower inner control arm bush's or other bush's but being one side get the b/j's checked first.
__________________
Tickfords T3/TS50 '02
Sprint8 manual Sept 24 '16
Daily Macan GTS
"Don't believe everything you read on the internet. Abraham Lincoln"
FTE217 is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 01:20 PM   #6
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

I had the same sound, balljoint it was.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 02:26 PM   #7
5.0 ED
FF.Com.Au Hardcore
 
5.0 ED's Avatar
 
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
Technical Contributor: For members who share their technical expertise. - Issue reason: has helped a number of AFF members with their cars, particularly with EEC tuning Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with sound technical advice. 
Default

yep had the same too mine was lower front left ball joint.
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm.
5.0 ED is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 03:02 PM   #8
Dauphin
Irregular member
 
Dauphin's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 3,941
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Endless work keeping the AU.com.au web site happening 
Default

Mine's currently doing this on and off - random squealing during left turns. If I cycle the handbrake lever a tiny bit while moving, it goes away. Always had problems with my handbrake since owning it.
__________________
2000 AU II FAIRLANE 75th ANNIVERSARY - big and shiny

My hovercraft is full of eels!


Movie Car Chase of the Week: Gene Hackman driving a 1971 Pontiac LeMans to chase an elevated train in The French Connection (1971).
Dauphin is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 03:06 PM   #9
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Quote:
Originally Posted by Dauphin
Mine's currently doing this on and off - random squealing during left turns. If I cycle the handbrake lever a tiny bit while moving, it goes away. Always had problems with my handbrake since owning it.
Then fix the handbrake :
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 05:00 PM   #10
broken_suave
FF.Com.Au Hardcore
 
broken_suave's Avatar
 
Join Date: Oct 2006
Location: Brisbane, QLD
Posts: 715
Default

...Russ its a Ford.. or did you forget? I've had mine 'fixed' a few times now... fixing a Ford handbrake doesnt mean it will work after you fix it :P
__________________
05 BF XR6 ZF 6spd - Stock for now

Previously:
98 AU Futura 4.0 - Wildcat Extractors, 200cpsi Stainless Cat, Custom 2.5" Mandrel Bent Exhaust, Tickford Snorkel, Fram 'Airhog' Panel Filter - Daily



79 P6 LTD Silver Monarch - Project
broken_suave is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 05:08 PM   #11
ayeyew
Teh Baest
 
ayeyew's Avatar
 
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
Default

Quote:
Originally Posted by Dauphin
Mine's currently doing this on and off - random squealing during left turns. If I cycle the handbrake lever a tiny bit while moving, it goes away. Always had problems with my handbrake since owning it.
Cheers, i'll have a go at this and see what happens

Thanks for the help fellas, i'll get my mechanic to look at the ball joints when he reopens
__________________
1999 Liquid Silver AU
Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!)
Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler

Coming..CMS Stg2A Cam, 68mm TB
Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220

Currently:
151kW (165 on other dynos )
ayeyew is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2009, 06:36 PM   #12
Dauphin
Irregular member
 
Dauphin's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 3,941
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Endless work keeping the AU.com.au web site happening 
Default

Quote:
Originally Posted by broken_suave
...Russ its a Ford.. or did you forget? I've had mine 'fixed' a few times now... fixing a Ford handbrake doesnt mean it will work after you fix it :P
That's right. It's been looked at several times. When I slowed to drive into my driveway after picking it up from Binks Ford adjusting it, it started sounding like a freight train turning a corner! I was so unimpressed.
__________________
2000 AU II FAIRLANE 75th ANNIVERSARY - big and shiny

My hovercraft is full of eels!


Movie Car Chase of the Week: Gene Hackman driving a 1971 Pontiac LeMans to chase an elevated train in The French Connection (1971).
Dauphin is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2009, 08:48 PM   #13
DJM83
Barra Turbo > V8
Donating Member3
 
DJM83's Avatar
 
Join Date: Jan 2005
Posts: 25,409
Default

Quote:
Originally Posted by Dauphin
Mine's currently doing this on and off - random squealing during left turns. If I cycle the handbrake lever a tiny bit while moving, it goes away. Always had problems with my handbrake since owning it.
Same here and a slight tweak of the handbrake lever fixes it. If not it goes away after 60 seconds anyway
__________________
2011 XR6 Turbo Ute
- Manual
- Lux Pack
- Twin 2.5" Stainless Exhaust
- Antz Turboside Intake
- CCForged Phatlux wheels
- Tuned by LS Tuning and Performance
DJM83 is online now   Reply With Quote Multi-Quote with this Post
Old 07-01-2009, 08:54 PM   #14
kenz
BOSS Pilot
 
kenz's Avatar
 
Join Date: Sep 2005
Location: on the loud pedal! Brisbane
Posts: 6,020
Default

I had a noise like that after I tightened up the handbrake when selling my old au. Couldnt work it out for a while but a huge pull on the handbrake and it went away. Think I nearly ripped the lever off
__________________
Black BAII XR8 Ute

Blue SY Territory Ghia


Quote:
Originally Posted by CAT600
No matter how good the F6 is (and it is damn good), its missing two cylinders.
kenz is offline   Reply With Quote Multi-Quote with this Post
Old 18-01-2009, 06:23 PM   #15
Makaveli81
Starter Motor
 
Makaveli81's Avatar
 
Join Date: Jan 2009
Posts: 5
Default

Quote:
Originally Posted by Dauphin
That's right. It's been looked at several times. When I slowed to drive into my driveway after picking it up from Binks Ford adjusting it, it started sounding like a freight train turning a corner! I was so unimpressed.

When was this Dauphin? Call up Matt at Bink's Footscray he help you out
__________________
The car is perfect when nothing more can be removed from it.

08 FG GT-P
Makaveli81 is offline   Reply With Quote Multi-Quote with this Post
Old 19-01-2009, 11:34 AM   #16
Dauphin
Irregular member
 
Dauphin's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 3,941
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Endless work keeping the AU.com.au web site happening 
Default

It was years ago now. I actually had some more issues with it this weekend just passed. It would start squealing when I move off from being stopped at a red light. Horrible sound. Tried all sorts of things, stopped by the end of the day.
__________________
2000 AU II FAIRLANE 75th ANNIVERSARY - big and shiny

My hovercraft is full of eels!


Movie Car Chase of the Week: Gene Hackman driving a 1971 Pontiac LeMans to chase an elevated train in The French Connection (1971).
Dauphin is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL