|
|
04-10-2022, 10:54 PM | #1 | ||
Regular Member
Join Date: Dec 2015
Location: Dubbo, formerly Canberra
Posts: 339
|
Sure, I know the diagnostic mode for the instrument panel...
- Engine off - Hold OK button - Switch on ignition (without starting engine) - Keep holding OK until 'TEST' is shown on the display I'd seen the 'Manufacture start' and 'Manufacture hours' pages, but I didn't know what they represented - you reckon 'Manufacture hours' keeps score of the number of hours the engine's run? 'Manufacture start' 6E = 110 'Manufacture hours' 1CBE = 7358 So if that's hours then I've averaged about 1 hour per 20km on the odo, or roughly 700 hours per year, seem a bit high but I guess is reasonable. But, I read those values over a week ago, and have done a few hours driving since, but the values haven't changed. I'd expect it to increment if it was really tracking engine runtime. Also, I found this example that reports a value of 0018 (equals 24) for a Focus that was four years and 90,000km old: https://www.fordownersclub.com/forum...unction-error/ So I'm not convinced this tells us engine hours? |
||