|
|
|
|
|
|
|
24-02-2015, 10:13 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2014
Posts: 10
|
Hello fellas ( and gals), was wondering if the 4 speed gearboxes off the kent/pinto motors are interchangeable, or if different bellhousings, gearbox mounts. etc are required?. Cheers.
|
||
|
|
|
25-02-2015, 01:57 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
interesting question
Engine Parts for Ford 1.6L & 2.0L (FF1600 & S2000 / FF2000) any pinto / kent motor setup owners out there ? http://www.thekentlives.com/ http://en.wikipedia.org/wiki/Talk%3AFord_Kent_engine
__________________
My car goes Brumm Brumm Last edited by dirty hands; 25-02-2015 at 02:02 AM. |
||
|
|
|
|
25-02-2015, 01:44 PM
|
#3 | ||
|
eskyman
Join Date: Sep 2005
Location: adelaide
Posts: 874
|
starter motor is on opposite side. im failry sure the box is the same just the bell housing thats different
__________________
who says kents cant be quick |
||
|
|
|
|
25-02-2015, 01:54 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,738
|
Burton Power have a real good site with lots of technical info as well as parts.
http://www.burtonpower.com/ Type 2 (kent Escort) is interchangable with the Type E (kent Cortina) but the shifter location is slightly different so needs a mod to the tunnel. Thats what I have in my Mk1 Type 2 has a cast bellhousing so a Kent one probably won't fit onto a Pinto. the usual mod is a 5 speed type 9 that has a separate bell housing |
||
|
|
|
Escort Gearboxes
Hybrid Mode