All interior light failing- fuse ok (Focus LW)

mcfee03 · 30-01-2021, 09:21 AM

Hi,

My interior lighting (both back and front) are not working at all.

Fuse 60 (under glove box) does not appear to be blown/broken
Swapping with known working fuse did not fix
Bulbs appear to be good (visually not broken/burnt out)

What are my next steps to debugging troubleshooting this problem?

Thanks

**mad2** · 30-01-2021, 11:13 AM

fuse working so good there .... if you have a multimeter pull globes & check for resistance or just swap in a 'spare' globe to check. can also use multimeter to check for power at light base.

mcfee03 · 31-01-2021, 12:08 PM

Quote:

Originally Posted by mad2

if you have a multimeter

Thanks for that. But I don’t have a multimeter (and am pretty remote, so cant get readily. Any suggestions to try without one?

Is it possible both bulbs are out they just “look” intact?

**mad2** · 31-01-2021, 08:14 PM

then another way is to pull out the globe/s & use a piece of wire to either apply power/earth to one side & [depending on globe] attach the globes other wire/connection point to the other battery terminal. i have no idea what globe you have.