![]() |
|
![]() |
#1 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
G'day guys,
In my quest to get my new car past engineers I have to go to NSW to find an engineer who wont make me take a $3000 epa test. He has requested that to prove the car meets emissions that I put a stock automatic series 1 XR6 on a dyno and get the 4gas readouts. It is my job to make my car put out similar emissions to prove it meets ADR's. Can anyone help me out in Victoria in the next few weeks? There could be cash or beer involved for your help. Ill likley only need to run the car on the dyno 3 or 4 times. There wont be any wide open throttle runs or anything. He wants readouts for idle, 2000 rpm, 3000rpm, 4000 rpm etc. I have to talk with him today to confirm if he will allow this still cos he only told me to suggest this to victorian engineers. He said the car had to be similar, so Im not sure if I can just use a forte, or fairmont, VCT, etc. If I cant do it this way its a long drive to NSW to take a test for free that costs $3000 here. Thanks guys Dan.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. Last edited by dansedgli; 29-04-2005 at 10:10 AM. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
![]() Join Date: Dec 2004
Posts: 12,083
|
Dan, I'd happily lend you mine but its VCT, has the exhaust and, worst of all, a chip. Would probably be under a stock car for emissions.
I will say to anyone out there who has a stock XR6, do Dan this favour, its worth it and whoever does it will get Donating Member status on aufalcon.com for their trouble.
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
||
![]() |
![]() ![]() |
![]() |
#3 | |||
Solution Was Boost 4?, 6 & 8
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
|
Quote:
__________________
[SIGPIC][/SIGPIC]
AUTOTECH TUNED EDELEBROCK CHARGED 2017 GT Mustang Plenty of RWKW |
|||
![]() |
![]() ![]() |
![]() |
#4 | |||
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
Quote:
![]()
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
|||
![]() |
![]() ![]() |
![]() |
#5 | |||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Quote:
Thanks heaps Casper! That would be awesome! I cant wait to get this car to cruising status. It looks sad in my driveway with no-one using it and the car cover on top :( XRFPV8- Would many rental companies have 5 year old XR6's available? That would be the easiest option if I can find one. I didnt think of that!
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
|||
![]() |
![]() ![]() |
![]() |
#6 | ||||
Solution Was Boost 4?, 6 & 8
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
|
Quote:
Quote:
|
||||
![]() |
![]() ![]() |
![]() |
#7 | ||
FF.Com.Au Hardcore
![]() Join Date: Dec 2004
Posts: 12,083
|
Dan, mines there if you need it, happy to do it.
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
||
![]() |
![]() ![]() |
![]() |
#8 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Thanks guys, Casper Ill let you know what the engineer says once he calls me back.
I will have this test done locally so really the car just has to be stock-ish and have reasonable emissions I guess. The engineer wont know what kind of vehicle I am comparing it to. I should put the EB on as the stock car ![]()
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Wouldnt Ford have this kind of info? Might be worth calling the CRC, it'd sure hold a bit more sway coming from the manufacturer than just someone with a dyno.
__________________
2024 F150 XLT
|
||
![]() |
![]() ![]() |
![]() |
#10 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
The engineer has done a backflip on me! He says that I would need to do the comparison in front if him which sucks.
So now I have to book it into the RTA in NSW to have the official emission test done. I guess Ill have to find a tuner in NSW to help me out with making it meet. Any ideas?
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#11 | ||
FF.Com.Au Hardcore
![]() Join Date: Dec 2004
Posts: 12,083
|
you could try and get it tuned to low emmission specs down here based on an AU XR6's emmissions. Then get one of the NSW guys (maybe Darkhorse) to bring his car in to do the comparison?
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
||
![]() |
![]() ![]() |
![]() |
#12 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Yeah that would work. I think Ill just go with the RTA test now though. Its seems simple enough to do and only takes 30 minutes to have done.
Ill ring up and book myself in once I can organise time off work. Does anyone know any decent tuners in NSW near penrith or botany?
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#13 | ||
FF.Com.Au Hardcore
![]() Join Date: Dec 2004
Posts: 12,083
|
Just remember, you'll need a Haltec qualified tuner too Dan.
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
||
![]() |
![]() ![]() |
![]() |
#14 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Yep, My mechanic reckons he can do it easily if he has the software.
I was thinking If I borrow a stock car for a day and get the emissions tested on a dyno here and make my car as close as possible do you think I will pass the official test in NSW? That way I can add cats and a smaller exhaust and turn the boost down etc etc to make it nicer before I head to NSW for the real test. This would save a lot of messing about. This way I could use a forte or even a newer BA to make it harder and more likley to pass the official one. Ill have to ask my mechanic what he thinks.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#15 | |||
FF.Com.Au Hardcore
![]() Join Date: Dec 2004
Posts: 12,083
|
Quote:
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
|||
![]() |
![]() ![]() |
![]() |
#16 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Ahh okay, its still to early for me
![]() Ill go around and talk the mechanic in person in the morning, I can never remember anything over the phone. That seems like it should work. Ill try and find out exactly what the test involves to see if I can rig the outcome. I cant wait to get this car legal!! It has to be the nicest car in my area!
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#17 | ||
T3/Sprint8
![]() Join Date: Jan 2005
Location: Australia
Posts: 16,316
|
Take it to Autotech in Granville (Sydney) speak to Spiro, ph 02 98971378
He's a Haltech agent as well.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
||
![]() |
![]() ![]() |
![]() |
#18 | ||
NO CARBON TAX
Join Date: Feb 2005
Location: st clair NSW
Posts: 624
|
hey dan, just engine management @ moorebank is the tuner ebxr8240 and i use.
yes he does haltec too and is quite cheap. let me know if and when your heading up so i can meet up with ya somewhere. will it be done at penrith rta??? michael
__________________
THE WORLDS FASTEST BISCANYE BLUE EB FALCON WITH EB BLOCK AND HEAD!!! NO AU **** THANKS Atomic performance engine, powerglide, coan converter, gtx55 turbo, 2000hp plazmaman water to air, 100mm throttle body, twin 50mm gates, side exit exhausts, 18 x 2200cc injectors, ems 8860 and race dash....... 7.83 @ 177 MPH 1100+ rwhp @ 40psi the first 7 second sohc ! eat it 1993 eb falcon 15.4 @ 90mph (tow car) |
||
![]() |
![]() ![]() |
![]() |
#19 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
yep most likely it will be at the penrith RTA. I still have to confirm a date and get time off work and things like that. Hopefully I can up there within a month.
Ill get the car pretuned down here and make the exhaust more emission friendly while Im at it.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#20 | ||
FTF Car Club NSW
Join Date: Dec 2004
Location: The Shire NSW
Posts: 1,791
|
stop in and say gday while your up in Sydney mate, give me a call beforehand if you want us to bolt anything on :dr_Evil:
|
||
![]() |
![]() ![]() |
![]() |
#21 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Ill come by and take a look.
Ill see how the cash is looking for a bulge but I doubt my chances at the moment.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#22 | ||
fully *** turboooo
Join Date: Dec 2004
Location: Eastern Suburbs, Melbourne
Posts: 523
|
can i come to NSW? road trip 2005!!!
__________________
AU1 Forte 178.6rwkw @ 5 psi Highflowed T03, Intercooled Full comp insurance :nutsycuck
|
||
![]() |
![]() ![]() |
![]() |
#23 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Yep! You can be my driver when the car is in getting tested!
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#24 | ||
fully *** turboooo
Join Date: Dec 2004
Location: Eastern Suburbs, Melbourne
Posts: 523
|
really? mad! im going to the casino as well!!
__________________
AU1 Forte 178.6rwkw @ 5 psi Highflowed T03, Intercooled Full comp insurance :nutsycuck
|
||
![]() |
![]() ![]() |
![]() |
#25 | ||
Ute Forum Moderator
![]() Join Date: Dec 2004
Location: Melb
Posts: 7,227
|
Dan surely there are emission levels set in the ADRs that have to be met?
|
||
![]() |
![]() ![]() |