Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 18-06-2005, 12:26 PM   #1
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default BMW M5 test

For those who haven't seen it as yet, and if interested, read on.....

From July 05 issue of Wheels magazine -

5L of naturally aspirated V10 producing 373kw @ 7750rpm and 520nm of torque @ 6100rpm.
The engine is all alloy weighing only 240kg, and redlines at 8250rpm.

7 speed sequential gearbox.

The car weighs 1755kg.

Performance figures -
0-60k - 2.4s
0-100k - 4.4s
0-160k - 9.4s
0-200k - 14.1s

0-400m - 12.5s @ 188kph (116mph)

5th, 6th, and 7th gear can reach it's 250kph limiter.

Now that is a car which I wouldn't say no to being in my garage.

Interestingly tested performance exceeded BMW's own claimed figures, being only a frag slower than Ferraris F360 F1, yet it can seat 4 adults in comfort.

All from only 5L (and certainly no lightweight), whos says we need more than 5.4L or forced induction in our Coons.....

Rick.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 12:30 PM   #2
philstoj
FF.Com.Au Hardcore
 
philstoj's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
Default

yes mate, but remember its virtually a stroked F1 motor...
And it only makes 20nm more than the old V8 one..
philstoj is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 12:36 PM   #3
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

Quote:
Originally Posted by philstoj
yes mate, but remember its virtually a stroked F1 motor...
And it only makes 20nm more than the old V8 one..
It doesn't matter where it came from, it's awsome.

The fact that this engine behaves like a normal family car, yet can perform like a supercar when needed, speaks volumes for the development which BMW have put into this engine (whole vehicle) yet again.
In any case, all of our road vehicles have technology which is slowly filtered down from the elite in racing, F1. It just happens that th likes of BMW (and others) get the technology a little quicker than the cars you and I can afford.

And the peak numbers don't tell the full story, we would need to see a torque curve to what is really going on.

Rick.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 12:46 PM   #4
Barry_v
rocknrolla
 
Barry_v's Avatar
 
Join Date: Dec 2004
Location: Adelaide, SA
Posts: 1,589
Default

so how much is it worth?
Barry_v is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 12:48 PM   #5
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

226k

Rick.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 12:52 PM   #6
paul7v7
bring it on
 
paul7v7's Avatar
 
Join Date: Dec 2004
Location: Praying....for you
Posts: 987
Default

i'd take it if it was offered to me, trade it in and get the older M5....
__________________
Here is the devil-and-all to pay.
paul7v7 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 01:00 PM   #7
XA-Coupe
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 5,644
Default

At last a Beemer I could own I guess this is what happens when you don't have to make engines up from already existing powerplants.
I havw watched older M5s on tarmac rallies ... fast but not a sports car, the M3s eat them in the curves.
XA-Coupe is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 01:03 PM   #8
philstoj
FF.Com.Au Hardcore
 
philstoj's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
Default

Quote:
Originally Posted by paul7v7
i'd take it if it was offered to me, trade it in and get the older M5....
I agree, the previous model was a beast, and looked the goods aswell, this one looks like the bastard lovechild of a hyundai cross Kia, bastardised by some french car :
philstoj is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 01:07 PM   #9
EDManual
FF.Com.Au Hardcore
 
EDManual's Avatar
 
Join Date: Mar 2005
Posts: 1,710
Default

the new M5 and M6 have a button for 300kw or the top power 373kw! Wonder what difference in speed that equates to?
EDManual is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 01:51 PM   #10
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

Quote:
Originally Posted by XA Coupe
At last a Beemer I could own I guess this is what happens when you don't have to make engines up from already existing powerplants.
I havw watched older M5s on tarmac rallies ... fast but not a sports car, the M3s eat them in the curves.
Agreed, in all cases I've seen, the M3 laughs at the M5, however the M5 is damn fine for the bulk and weight it carries.

Rick.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 02:01 PM   #11
XA-Coupe
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 5,644
Default

Yeah.. depends if you want a sports car and all that comes with it or a damned fast mini limo.

Hell.. I just realised ... we agreed on something
XA-Coupe is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 02:09 PM   #12
MrSparkle
An Old Boss™©
Contributing Member
 
MrSparkle's Avatar
 
Join Date: Dec 2004
Posts: 1,145
Default

Quote:
Originally Posted by XA Coupe
At last a Beemer I could own I guess this is what happens when you don't have to make engines up from already existing powerplants.
I havw watched older M5s on tarmac rallies ... fast but not a sports car, the M3s eat them in the curves.
YOU ..... talking about SPORTS CARS..... and CURVES.....!?!?!?!?!??!!??! :

Ok mate, what in the hell is going on here!!!! : :

Back to the topic at hand - I would have any of the past three models of M5 in a heartbeat, and the newest one would be my first choice. It is truly a weapon and that engine is a MASTER-FRIGGEN-PIECE. Anyone who disagrees about this point on the engine, well, I'm afraid that you simply are wrong. No, really - you are wrong. : You see, it's quite simple - it has won the Engine of the Year 2005 :
http://www.rsportscars.com/eng/artic...gine_award.asp

Not everyone likes the way it looks but I reckon it's the second best looking of the Bangled Beemers, after the M6.

Awesome car and yet another example of a sports sedan should be built. Note to FPV - use this car as your benchmark and you will do well. :togo:
__________________
Where did I go? What was I doing there?™©
MrSparkle is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 02:14 PM   #13
M&Ms
Donating Member
Donating Member1
 
M&Ms's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 1,940
Default

Monday 6th June 2005, 9.30am at Sydney Town Hall, I see a bronze coloured BMW M6 drive past on George Street heading north... I couldn't believe it, I mean the M5 is scheduled for sale here in July and the M6 in late '05, what the hell was this doing here? And btw, they look A LOT better in reality then some pics might suggest.
M&Ms is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 02:38 PM   #14
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

Quote:
Originally Posted by XA Coupe
Yeah.. depends if you want a sports car and all that comes with it or a damned fast mini limo.

Hell.. I just realised ... we agreed on something
I take back everything I said :

Rick.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 05:10 PM   #15
XRated
Shoot.
 
XRated's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 4,909
Default

Quote:
Originally Posted by MrSparkle
Back to the topic at hand - I would have any of the past three models of M5 in a heartbeat, and the newest one would be my first choice. It is truly a weapon and that engine is a MASTER-FRIGGEN-PIECE. Anyone who disagrees about this point on the engine, well, I'm afraid that you simply are wrong. No, really - you are wrong. : Y
Yes yes indeed! I'd have an M5 in a heartbeat. Easily one of my favourite cars of all time, I just wish the new engine/drivetrain combo was in the last shape. Ohhhh mama.
__________________


20V Turbo

XRated is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 06:28 PM   #16
smoo
FF.Com.Au Hardcore
 
smoo's Avatar
 
Join Date: Jan 2005
Posts: 3,065
Default

It apparantly beats anything up to Gallardos with 4 people in the car. Quite impressive. Dunno if it was completely run in or not too.

http://www.m5board.com/vbulletin/sho...9&page=3&pp=35 -post #74

The E34 was the best looking IMO, and according to 'BMWCar' magazine, the best out of the first three, this comparo was done last year, before this one was came out.

But will the launch control and driveline still be reliable in 20 years time?
smoo is online now   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 09:42 PM   #17
Steffo
LPG > You
 
Steffo's Avatar
 
Join Date: Dec 2004
Location: Sydney, NSW, Australia
Posts: 4,277
Default

Never quite liked BMW's sports sedans. The M3 is OK, looks great.. but the M5, beh.

I wonder how it'll go when they put it against this piece of automotive art:


5439cc SOHC 24v Supercharged V8
350kW (469hp) @ 6100rpm
700Nm (517ftlbs) @ 2650 - 4500rpm
0-100km/h: 4.3
0-160km/h: 9.9
0-1/4 Mile: 12.5 @ 116mph
Limited to 250 like the M5, and every other German sports sedan.

Oh.. it weighs 1925kg. And costs $221,900 :(

http://www.fast-autos.net/mercedes/03mercedese55.html For anyone who wants E55 stats.

http://www.fast-autos.net/bmw/bmwe60m5.html <-- There's the new M5.

Can't wait for a M5 vs E55 AMG test
__________________
LPG Lovers Association President & Member #1.

:
Steffo is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 10:53 PM   #18
Barry_v
rocknrolla
 
Barry_v's Avatar
 
Join Date: Dec 2004
Location: Adelaide, SA
Posts: 1,589
Default

fast cars.. but not much to look at.
Barry_v is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2005, 11:53 PM   #19
Kirium
Brain stuck in neutral
 
Kirium's Avatar
 
Join Date: Jun 2005
Location: Canberra, ACT
Posts: 18
Default

Quote:
Originally Posted by Steffo
Never quite liked BMW's sports sedans. The M3 is OK, looks great.. but the M5, beh.

I wonder how it'll go when they put it against this piece of automotive art:


5439cc SOHC 24v Supercharged V8
350kW (469hp) @ 6100rpm
700Nm (517ftlbs) @ 2650 - 4500rpm
0-100km/h: 4.3
0-160km/h: 9.9
0-1/4 Mile: 12.5 @ 116mph
Limited to 250 like the M5, and every other German sports sedan.
You wanna know how it goes against an E55??

http://archive.potatoesmc.com/admin/...aceE55vsM5.wmv

Right-click and save as and find out...

Anyone can take their biggest engine and chuck it in an average chassis and run quick straight line times... HSV make a living out of it.. ;) seriously tho, AMG's will never be as good as M cars because they're not fully fledged, ground-up engineered, all-round performance cars like M cars are...
__________________
Currently:
2006 VW Golf GTI

Formerly:
VYII SS
VTII Calais

Last edited by Kirium; 19-06-2005 at 12:10 AM.
Kirium is offline   Reply With Quote Multi-Quote with this Post
Old 19-06-2005, 12:34 AM   #20
Smoked
Burnin Rubber
 
Smoked's Avatar
 
Join Date: Jan 2005
Location: Melbourne, Victoria
Posts: 1,824
Default

Ill have either thanks.

Sell it and buy a house.
__________________
2001 AUII Forte (LPG)
K&N Air Filter
Tickford Air Intake
***Coming Soon: Clear Side Repeaters***
Quote:
Originally Posted by The-ShowStoPPa
...dont get me wrong this 3.8v6 is pretty special, it does come with the popular shake rattle and roll option and the auto compliments this with the ever popular snap crackle and pop feature
Smoked is offline   Reply With Quote Multi-Quote with this Post
Old 19-06-2005, 12:35 AM   #21
Steffo
LPG > You
 
Steffo's Avatar
 
Join Date: Dec 2004
Location: Sydney, NSW, Australia
Posts: 4,277
Default

You can't get any house worth living in for $220k. Not in Sydney anyway...
__________________
LPG Lovers Association President & Member #1.

:
Steffo is offline   Reply With Quote Multi-Quote with this Post
Old 19-06-2005, 12:39 AM   #22
Smoked
Burnin Rubber
 
Smoked's Avatar
 
Join Date: Jan 2005
Location: Melbourne, Victoria
Posts: 1,824
Default

Why would i want to reside in Sydney, i love being a mexican thanks.
__________________
2001 AUII Forte (LPG)
K&N Air Filter
Tickford Air Intake
***Coming Soon: Clear Side Repeaters***
Quote:
Originally Posted by The-ShowStoPPa
...dont get me wrong this 3.8v6 is pretty special, it does come with the popular shake rattle and roll option and the auto compliments this with the ever popular snap crackle and pop feature
Smoked is offline   Reply With Quote Multi-Quote with this Post
Old 19-06-2005, 12:57 AM   #23
gtfpv
GT
 
gtfpv's Avatar
 
Join Date: Apr 2005
Location: SYDNEY
Posts: 9,205
Default

these cars are nice but who canafford them 225,000 bucks and then i guess you can add options .now how about parking them . where , down at the school , grocery shops, gym, pub, club,pictures, mum and dads. trian station . ahhh yes your garage. no thanks. i'd cry over a $25000 dollar car with a key scratch , never mind 230 000 schmackos.
now let me see an xr 8 or gt or fairmont or phoon or xr6t, or just xr6. what could i do to the perfomance suspension engine , driveline . interior . for say $30,000 and yes it would still be less than $ 100,000.
gtfpv is offline   Reply With Quote Multi-Quote with this Post
Old 19-06-2005, 02:59 PM   #24
CAMS290
trying to get a leg over
Donating Member2
 
CAMS290's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,690
Default

Not comparing apples with apples, but how will this piece of old tech compare
with the M5 ?



Developed specifically for the 2006 Corvette Z06, this ultimate Gen IV small-block has a full 7.0 liters of displacement, a 7000-rpm redline and 500 horsepower with 475 lb.-ft. of torque. We borrowed some very important lessons learned from the C5-R racing program to put this engine on the street. If you compare it to our LS2, it's got a different front cover, oil pan, exhaust manifolds and cylinder heads. We cast a unique aluminum block for the LS7, with pressed-in cylinder sleeves, versus the cast-in sleeves of the LS2. Aluminum flat-top pistons inside the 4.125-inch cylinder bores give a compression ration of 11.0:1. Titanium connecting rods drive the forged steel crankshaft, moving through a 4-inch stroke. We gave the LS7 a dry-sump oiling system to assure proper lubrication at the high lateral g-forces that the Z06 is capable of – that system came straight from the racing program.

Proper airflow is critical for the 427. That's why the cylinder heads yield better than a 40% increase in flow capability. The tunnel-like intake runners are a straight shot – the ports maintain this velocity to provide excellent low-end grunt and terrific horsepower in the high rev range. The aluminum heads themselves have 70-cc combustion chambers fed by large, 56-mm titanium intake valves. The exhaust valves are 41-mm, sodium-filled pieces. A unique hydraulic roller camshaft actuates the valves – the LS7's cam profile is derived from the C5-R program, providing .591-inch lift.

Like other Gen IV engines, we used a composite, three-piece intake manifold – with further improved airflow for the LS7. A 90-mm-diameter, single bore, electronically controlled throttle body is the gateway to the induction system. High capacity 5-gram/second fuel injectors are mounted in the manifold assembly. On the exhaust side, we selected LS7-specific hydroformed steel tubular headers. A special quad-outlet collector flange dumps exhaust gases at the tip of the header outlet and into a "wide-mouth" catalytic converter. This greatly reduces the Z06's backpressure.

Because of the special nature of this engine – the precision machining and balancing, along with all of the premium components – every LS7 engine will be assembled by hand in our new-from-the-ground-up Performance Build Center in Wixom, Michigan. This assembly center is staffed with highly trained engine-build specialists, who follow each engine through the 15 sub-assembly stations. The team completes 30 engines per day – completed, balanced and performance-tested, the engines are then shipped to the Corvette Assembly Plant in Bowling Green, Kentucky for mating with the Z06 chassis.

The 427 Corvette returns! And Walter Mittys everywhere will be eating GT-class Porsches for breakfast on their morning commute.
__________________
Cameron
------------------------------------------------------
CAMS290 is offline   Reply With Quote Multi-Quote with this Post
Old 20-06-2005, 07:01 PM   #25
D1ffuse
Starter Motor
 
Join Date: Jun 2005
Posts: 4
Default M5 performance figures

Quick question Sox. How did you get this information? My subscriber copy of Wheels doesn't arrive until Wednesday June 22... You on staff at wheels or something?
D1ffuse is offline   Reply With Quote Multi-Quote with this Post
Old 20-06-2005, 07:11 PM   #26
Steffo
LPG > You
 
Steffo's Avatar
 
Join Date: Dec 2004
Location: Sydney, NSW, Australia
Posts: 4,277
Default

Quote:
Originally Posted by Kirium
You wanna know how it goes against an E55??

http://archive.potatoesmc.com/admin/...aceE55vsM5.wmv

Right-click and save as and find out...

Anyone can take their biggest engine and chuck it in an average chassis and run quick straight line times... HSV make a living out of it.. ;) seriously tho, AMG's will never be as good as M cars because they're not fully fledged, ground-up engineered, all-round performance cars like M cars are...
Um, are you ok? AMG cars won't ever be as good as M cars? They're not all-round performance cars? Rightio then. One video like that isn't going to convince me the M5 is faster, I've got a video of a stock E55 raping a 452rwhp 2003 SVT Cobra. By all rights, the E55 should lose, it didn't.

As for not being all-around performance cars, rightio then. The BMW M5 and E55 AMG are extremley similar. Neither is built from the ground up as a performance car. In the E55's case, AMG get their mits on an E500, pull the motor out, stroke it, bolt on a Lysholm twin-screw supercharger, and do some head work etc. Then they change the exterior apperance slightly, change the interior. They re-work the suspension, steering, transmission etc. And you have an E55 AMG.

BMW do much the same with an M5, except that now, unlike before, it gets a unique engine. 5.0litre V10 shared only with one car - M6. Its still a 545i under the skin though, which has been altered on the outside, inside, and had its suspension/driveline modified.

FPV and HSV do exactly the same thing, but on a far lesser scale.

Oh, and if you want to compare M's and AMG's dedicated track specials..

http://www.fast-autos.net/bmw/bmwm3csl.html <-- BMW E46 M3 CSL.

http://www.fast-autos.net/mercedes/m...clkdtmamg.html <-- Mercedes-Benz CLK-DTM AMG.

Neither M nor AMG cars are engineered from the ground-up as anything. They're extremley well re-engineered sports sedans, based around a family/luxury sedan.

Back to the M5... I can't wait until an E55 vs M5 write up, should be really tasty. AMG vs M is like FPV vs HSV.. hehe.
__________________
LPG Lovers Association President & Member #1.

:
Steffo is offline   Reply With Quote Multi-Quote with this Post
Old 20-06-2005, 07:16 PM   #27
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

Quote:
Originally Posted by D1ffuse
Quick question Sox. How did you get this information? My subscriber copy of Wheels doesn't arrive until Wednesday June 22... You on staff at wheels or something?
Dunno why it comes so early, I didn't even intentionally subscribe to it, it was a freebie for signing up with a phone company or some crap.

Rick.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 20-06-2005, 07:40 PM   #28
ssj_jaypee
EF POWER IS HERE!
 
ssj_jaypee's Avatar
 
Join Date: Jan 2005
Location: Townsville, QLD
Posts: 285
Default

If HSV get the balls to build the next GTS sedan with the 7 Litre Z06 powerplant Australia will make history in the Automotive world along side the BMW M5 as people moving 4 door Supercars!

All FPV have to do is build a GTHO. We are talking about a supercharged 5.4 donk.
Ahh we can only dream.
__________________
My pimpin ride:
'95 Ford EF Falcon Futura w/ 5spd manual

Mods currently done:
Pacemaker extractors, true dual 2.5" exhaust to a single 3" tip
CSA 16" 5 spoke mags, spoiler, stoneflector side skirts
K&N panel filter
Tickford AU snorkel
ssj_jaypee is offline   Reply With Quote Multi-Quote with this Post
Old 20-06-2005, 07:46 PM   #29
Steffo
LPG > You
 
Steffo's Avatar
 
Join Date: Dec 2004
Location: Sydney, NSW, Australia
Posts: 4,277
Default

Quote:
Originally Posted by ssj_jaypee
If HSV get the balls to build the next GTS sedan with the 7 Litre Z06 powerplant Australia will make history in the Automotive world along side the BMW M5 as people moving 4 door Supercars!

All FPV have to do is build a GTHO. We are talking about a supercharged 5.4 donk.
Ahh we can only dream.
HSV will not ever get the GenIV LS7. It is a hand-built Z06 only special, and GM will not be making any extra's for a market as tiny as HSV's. Not going to happen ever.

If there is a new GTS, expect a PWR Supercharged LS2, or something along those lines.

As for making history, done that already. Falcon GT-HO was the fastest sedan back in its day, HSV's GTS300 was as fast as the E39 M5. For Aussie cars to really have any global-scale impact, they need to be sold internationally. Not just here.
__________________
LPG Lovers Association President & Member #1.

:
Steffo is offline   Reply With Quote Multi-Quote with this Post
Old 20-06-2005, 08:28 PM   #30
EDManual
FF.Com.Au Hardcore
 
EDManual's Avatar
 
Join Date: Mar 2005
Posts: 1,710
Default

just read about the new M5 beating the new Ferrari f430 in nearly every way!
EDManual is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:36 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL