|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-01-2014, 09:24 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2014
Posts: 1
|
Hi all how do you remove climate control panel on
a au 2 XR6 year2000? |
||
|
|
|
09-01-2014, 09:37 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Melbourne
Posts: 2,035
|
1. Open the glove compartment and disengage the limit pins by pulling the slides of the glove compartment inwards. Lower the glove compartment and firmly lift the right hand side corner to disengage the hinges. Manoeuvre the glove compartment from the dashboard.
2. Mark the installed position of the heater control cable in relation to the leaver and disengage the cable from the lever by opening the lock. Disconnect the heater control cable from the heater unit 3. Disconnect the vacuum supply hose from the t piece in the vacuum hose harness. Disconnect the vacuum hose harness connector beneath the air intake duct. Release the clips retaining the loom to the dashboard. 4. Tightly tape a length of string or similar to the end of the heater control cable and the vacuum hose harness to ease installation. 5. Remove the sound system. 6. Remove the screws retaining the radio surround panel. Prise the surround panel from the dashboard. 7. Partially withdraw the control panel from the dashboard and disconnect the wiring connectors from the rear of it and the cigarette lighter. 8. Remove the string from the heater control cable and vacuum hose and withdraw the radio surround panel from the vehicle. Installation is reversal of the procedure.
__________________
2015 MK7 VW GOLF GTI __________________
Previous Cars 2002 AUIII XR6 1995 EF Falcon XR6 2003 LR Focus Zetec 1989 KE Laser TX3 |
||
|
|
|
| This user likes this post: |
XR6 au
Linear Mode
