|
|
|
|
|
24-08-2015, 08:40 AM
|
#1 | ||
|
Regular Member
Join Date: Feb 2014
Posts: 92
|
Hi all
I'm looking to bring a late model Falcon ute from Queensland to Perth, it's registered now but I'll have to re register it over here. It's a standard 2008 FG F6 ute, stock standard. Will there be any issues come transfer time and registration time here in Perth?? Cheers |
||
|
|
|
24-08-2015, 10:37 AM
|
#2 | ||
|
Regular Member
Join Date: Dec 2007
Posts: 223
|
It should be fine if it has been maintained in roadworthy condition. Having said that, the GTP I bought and had sent over from VIC had been lowered, exhaust changed (rear mufflers replaced with straight pipes), diff bushes ripped, CV boot ripped and handbrake only held on the drivers side and it still passed.
The only thing I've had to do when bringing cars over from interstate is making sure you have a permit to move (if the ute isn't in your name in QLD), without the permit, the inspection centre wont drive the ute and wont pass it. The permit to move can be purchased online http://www.transport.wa.gov.au/licen...ent-permit.asp If the ute is already registered in your name then you wont need the permit. Hope this helps. Cheers
__________________
2008 BFII Tornado in EGO. Manual #207. 2011 SZ Titanium TDCI SOLD - 2006 BF 1 GT-P in Mercury Silver Manual 
|
||
|
|
|
|
24-08-2015, 07:24 PM
|
#3 | ||
|
Banned
Join Date: Mar 2010
Location: PERTH. WA
Posts: 4,697
|
I purchased a car in perth that was registered in vic,i told the guy id buy it if he transferred it to wa rego,he said he just had to pay 3 months license and pay for new plates,that simple.
There was an inspection,the car wouldn't have passed in a fit... I think if you bought car and it was purchased in wa with out of state plates and registered in your name with those out of state plates then it goes over the pits to get wa plates. |
||
|
|
|
| This user likes this post: |
|
24-08-2015, 07:37 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2005
Location: perth
Posts: 4,355
|
yep if you buy reg out of state you have to either reg it there in your own name (most states means you need to show you live there with an address so to say) or get them to transfer prier to sale or its over the pits again
__________________
yes still (as money n time permit) doing the rebuilding the zh fairlane with a clevo 400m 4v heads injected whipple blown with aode 4 speed trans to a 9" ....... we'll get there eventually just remember don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! I have taken up meditation... at least it's better than sitting around doing nothing !! |
||
|
|
|
|
24-08-2015, 07:50 PM
|
#5 | |||
|
FF.Com.Au Hardcore
Join Date: Feb 2008
Location: Perth, Northern Suburbs
Posts: 5,027
|
Quote:
It needs to be inspected in WA, and you have to pay the stamp duty. It wasn't much even on a $24k car. I can't imagine there would be much wrong with a 2008 model. At least now it doesn't have to go to an actual DoT station, there are numerous licensed workshops around. If you happened to be in the Northern Suburbs I can recommend one in Greenwood. The main thing is to have all your documentation in order. Proof of sale, AND proof of payment. And of course make sure the car is REVS clear.
__________________
2024
Making Whine from the Tears of Hippies |
|||
|
|
|
|
24-08-2015, 07:58 PM
|
#6 | ||
|
Banned
Join Date: Mar 2010
Location: PERTH. WA
Posts: 4,697
|
I misread the first post,my mistake,you will need an inspection if you are buying it from interstate,i misread and thought you already owned it.
Sorry |
||
|
|
|
Rego transfer to Perth
Linear Mode
